The types of wooden doors you want to know


Are you looking to buy new doors but wondering what types of wooden doors to choose?

Find your answers in this article, from the common types of woods to popular designs.

You can pretty much finalize the decision.

Types of wooden doors by materials

There are many types of wood used for the production of wooden doors.

And among the large variety, there are mainly 2 categories: Hardwoods and softwoods.

Hardwoods vs softwoods: the 2 general wood categories for various types of wooden doors

Hardwoods and softwoods get their names by how easily they are likely to cut. So, hardwoods are not always harder material. And vice versa, softwoods are not always softer.

However, hardwoods are usually denser because they need longer time to grow. On the other hand, softwoods are less dense in most cases because they grow in a shorter time than hardwoods.

To go further into the 2 categories of woods, let’s take a look at their pros and cons.

Pros of hardwoods

Longevity. Hardwood products are of high quality with long service life and do not need frequent replacement.

Easy to maintain. Hardwood is not hard to clean. And there is no need to worry about serious wear and tear. Even if there are scratches and dents, it’s possible to repair.

High strength. Because of the dense cellular structure of trees, hardwood products are very strong.

Nice appearance. Hardwood has a variety of colours and finishes; you can always find the matching colours and veneer you like. Also, hardwood products are suitable for any contemporary environment.

Strong fire resistance. Compared with softwoods, hardwood has stronger fire resistance and is not easy to burn out by the fire.

Cons of hardwoods

Along with the benefits, there are some downsides of hardwoods as well.

Slow growth rate. Hardwood trees grow slowly. Thus, it takes a long time for the wood to be ready for production.

Difficult to process. Due to the dense structure of the trees, hardwood is often difficult to use in processing. So, the processing technology for hardwood is complex.

Higher cost. The price of hardwood is relatively high for the cost of production. But its quality is very good and can last for a long time. So, the cost of hardwood is high at the beginning, but it will ease you in the long run.

Renovation. In areas with heavy traffic, hardwood floors need to be renovated. In this case, the price of hardwood flooring renovation will be high, and other costs are not low.

types of wooden doors 01

Pros of softwoods

Easy to process. Since the softwood trees are less dense than the hardwood, it’s easier to process them. Hence, the technology required to process softwoods is simpler. They can cover a bunch of situations and applications as a result.

Great sustainability. Unlike hardwoods, softwoods can grow really fast. And the fast growth rate leads to a shorter production period. In other words, it takes less time to produce doors with softwoods than hardwoods. For this reason, softwoods are considered as a renewable natural resource.

Lower cost. The cost of softwood is lower than hardwoods because the processing technology is simpler. The softwood production can generate more output given the same time. Then, the cost per unit is cheaper as a result.

Cons of softwoods

Less dense. The density of softwoods is relatively low, compared with hardwood, softwoods are less durable and easy to wear. There are some softwoods trees with higher density though, such as juniper and yew.

Lower longevity. The lifespan of softwood products is shorter. And you will probably need to replace them frequently when lacking regular maintenance. So, softwoods are not suitable for areas with the extreme condition. Nor the best option for outdoor use.

Poor fire resistance. The fire resistance of softwoods is poor. Without special treatment, they can easily burn in the case of fire. Thus, if you’re choosing softwoods for your doors, it’s better to buy those with fire-proof treatment.

types of wooden doors 02

Hardwoods commonly used for doors: types of wooden doors by materials #1


Pros of Mahogany

Affordable than before. Due to the development of production technology, it’s much faster to produce Mahogany today. As a result, Mahogany is cheaper and easier to buy than before.

Easy to grow. Mahogany can grow normally in arid and barren hillsides, it grows well in moist, deep, fertile and well-drained soil though.

Cons of Mahogany

The merits of Mahogany come with a colour difference, as they will get black after absorbing moisture. So, applications in large areas will make the textures and grains blur. That’s why you don’t see them often in products with high requirements for colour difference.


People use Mahogany mainly to make high-end furniture, ships, cars, piano, Violin and so on. It is famous for its decent style.

If you have a loose budget and don’t care much about the colour difference, Mahogany is definitely a great option.

African Cherry

Pros of African cherry

The wood has good bending property, low hardness and medium strength.

And African Cherry is easy to process.

Other than wooden doors, you might find them common in parquet floor, pipe, musical instrument. And solid wood furniture, cabinet and some other high-level fine wood workpiece as well. They are especially suitable for making carving parts.

On the other hand, selected logs of African Cherry can serve as veneers, parapet and smooth door, etc.

African cherry wood has straight, regular texture, and dark red lines, which give them a smooth appearance.

Cons of African cherry

As for the downsides, African cherry wood is difficult to preserve and require regular maintenance.

Due to the popularity of African cherry, it’s not hard to see fake African cherry products on the market. So be careful of your choice, and find a reliable wooden door supplier like EEHE


Known for its strong hues, African Cherry creates a warm red atmosphere.

They are suitable for decorating a noble-style home.

Moreover, African cherry is suitable for indoor or outdoor use.

And again, when choosing African Cherry, pay attention to authenticity.

Pacific Cherry

Pros of Pacific Cherry

The low price is one of the features that make Pacific Cherry stand out.

They are so cheap that most people can afford them.

As Pacific cherry is usually produced in large quantities, suppliers offer them with bulk orders in most cases.

Cons of Pacific Cherry

Pacific cherry is not easy to preserve and will react with sunlight. So, it’s necessary to seal it for protection.

Also, they require regular maintenance over the years.


Manufacturers use Pacific Cherry mainly for frames, panels, or other decorations to with sustaining functions.

And, Pacific cherry is ideal for outdoor use.

Softwoods commonly used for doors: types of wooden doors by materials #2


Pros of pine

Pine trees are cheap, lightweight and affordable for most people. So, it is suitable for projects with low budgets.

And because of its strong adaptability, pine can grow in various types of soil.

However, the soil will still have a direct impact on the growth of pine trees. Therefore, pines grown in a fertile soil area will have healthier growth, hence generating better wood products.

Cons of pine

As a result of their softness, pine woods are easy to scratch or dent, and easy to wear.

The service life of pine products is shorter than some heavier wood, so the cost performance is low.


Wooden doors by pine woods are best to use indoor because they are soft and not resistant to wear.

When it comes to styles, pine doors can give it a touch of the country for the house.

White Oak

Pros of White Oak

White oak has a smooth, wear-resistant cut and beautiful grain quality on raw products.

And it is impervious to water. That’s why you find them widely used in wine barrels. The feature gives it excellent water-resistant performance.

Cons of White Oak

As a member of the softwood family. The growth of white oak is slow. And the cycle can last as long as hundreds of years.

Because of its light colour, White Oak can get stains easily on its skin.

Also, it is easy to crack at the joint, plus the difficult process and defect rate. It requires undivided attention for the maintenance.


White oak is suitable for styles like a craftsman, medieval, or business workspace.

After all, White oak can fit the needs for outdoor and indoor use.

Red Oak

Pros of Red Oak

Red oak has strong fire resistance, even if the ground part is burning, its underground part can still sprout.

The wide variety of growth conditions, different climate and soil types make the appearance of sawn timber and veneer very different. This diversity provides a variety of choices for the market and widens the scope of application.

At the same time, Red Oak has a more even finish than White Oak.

And the density of Red Oak is high, the wood is hard and heavy, which makes it strong and durable.

Cons of Red Oak

Moisture can penetrate and stain the wood, because red oak is porous, open grains. And it shrinks more easily.


As well as White Oak, Red oak is suitable for craftsman, medieval, or a commercial workspace.

And they are great for interior or exterior doors.

Manufactured woods commonly used for doors: types of wooden doors by materials #3

Particle Board (Chipboard)

Particleboard is a kind of artificial wood, which is made of wood chips and wood chips bonded together with resin, which has good sound absorption and sound insulation performance.

Particleboard is a popular raw material in the furniture manufacturing industry. Many furniture manufacturers choose particleboard as raw material, especially IKEA.

Particleboard is a kind of dense wood, which is usually used with veneer and is often used in flat packaging furniture and working surfaces.

Particleboard and solid wood particle board are not the same kinds of board. The processing technology of solid wood particle board is similar to that of particleboard, but its quality is much higher than that of particleboard.


Fibreboard is a kind of cheap man-made wood, which is decomposed from hard or softwood into fibres, and then bonded together with wax, resin and heat to form a compact wood.

Fibreboard has the advantages of uniform material, small strength difference between vertical and horizontal, and not easy to crack.

One of the most popular Fibreboard is MDF, which is famous for its strength and durability. It is an ideal material for furniture products, which can make the furniture more beautiful.


Plywood is a very strong man-made wood because it is made of layers of wood veneers bonded together to form a smooth board.

Plywood is light in weight, clear in lines, strong in strength and not easy to deform. Moreover, the installation is convenient, the construction difficulty is low, it is not easy to be warped, and the tensile performance is very good.

Because of its inherent strength and anti warpage of adhesive cross-layer structure, it is very popular in the furniture and flooring industry. At the same time, plywood is widely used in aircraft, ships, trains, automobiles, buildings, furniture, precision equipment and packaging boxes.

MDF (Medium Density Fibreboard)

MDF is made by mechanical separation and chemical treatment of wood or plant fibre, mixed with an adhesive and waterproof agent, and then formed by high temperature and high pressure.

MDF is very powerful and much more popular than people think. In fact, many people will be surprised at how much MDF furniture they have around them.

The structure of the density fibreboard is more uniform than that of the natural wood. It also avoids the problems of decay and insect damage. At the same time, it has small expansion and contraction and is easy to process.

Because MDF has a flat surface and is easy to stick with various finishes, it can make the finished furniture more beautiful. Your furniture may be more durable than you expected. However, it is not solid wood, but it is only a small part of the price of solid wood.

MDF is very popular with IKEA, another leading furniture retailer.

In most cases, furniture built from MDF is glued to a layer of wood veneer, making it look expensive.


A veneer is a thin layer of woodcut from the periphery of a tree. A veneer is a wood material used to make plywood and other man-made boards. Gluing the veneer to a dense piece of wood, usually MDF, particleboard, or plywood. Veneers come in a variety of sizes, ranging in thickness from 3 to 6 mm.

Many people mistakenly believe that veneered furniture is cheaper than solid wood; however, a veneer is often used in high-end furniture and is more expensive than solid wood.

If you want to know if your furniture is veneered, the check is to look at the edges and check that the grain lines extend from the top to the edge of the wood. Since the veneer is solid wood, it will accept stains and finishes like solid wood.

Types of wooden doors by styles

Roller doors

Rolling shutter doors, also known as sectional overhead doors, are commonly used in garages, workshops, storefronts and storage facilities. Now you can find a lot of fashionable design, which is a good complement to the living room. Rolling shutter doors are also widely used in shops.

They are usually made of glass fibre or metal, and they are very wear-resistant. Also, you can install a rolling shutter door in the house to separate the interior from the garden or deck. Rolling shutter door is a great advantage because it doesn’t need too much space.

It requires little maintenance and is durable, which is the main highlight of this door. It also provides proper security and some much-needed privacy, mainly if your house is located in a busy area. When you have a rolling shutter door, you set up a protective barrier between the house and the outside world.

Hinged doors

The single hinged door is one of the most frequently utilized doors for the home interiors. Since one end of the door will be installed on the hinges, the other end tends to swing open from one space to another. Thus, you need to ensure that the room has sufficient space for opening the hinged door; otherwise, it will end up blocking your limited space.

You can get hinged doors just as a single piece and have them professionally installed, or you can choose the pre-hung door system with a hassle-free installation procedure.

The exterior doors have 3 hinges and are pretty heavy. But the interior doors are relatively lightweight and have two hinges. As for thickness, the exterior doors are about 1-¾ inches, while the interior ones are commonly 1-⅜ inches.

The advantage of rolling shutter door is that it is very cheap and suitable for people with a small budget. The disadvantage of rolling shutter door is that it is easy to rust, and it is easy to damage if it is pulled in too many times.

Pocket doors

Many old houses have interior pocket doors that slide into the walls when they are fully opened. Pocket doors have been around for decades; however, they have recently been upgraded to some beautiful beauty.

By the way, the operation of this door is not very complicated. You have to move the door in or out of the well-designed part of the wall. The wall space where you plan to install the door should not have any pipes or wires running through it.

Besides, you can buy pocket doors with both single and double doors. It allows you to open the door without blocking any extra floor space. This makes it convenient, especially if you’re in a particular area of the house with limited space.

French doors

If you are looking for something unique and meaningful, then French doors are most likely to meet your needs. The French door is secured by three to four hinges, which are carefully mounted on both sides of the opening. To get a clear view and a particularly wide opening, you can open both sides of the door.

The French doors add a glamorous feel to the house, they always tend to adopt the traditional design. Most of the time, people choose glass panels when choosing French doors because it makes it look better and highlights the design.

French doors are most commonly used to create a passage between rooms, but French doors also look beautiful as an outdoor courtyard door.

Pivot doors

The pivot door helps to strengthen the overall decoration of the house, which is in line with the modern style of decoration design. When the pivot door opens, the panel looks like part of the wall design.

The door frame design helps to support the heavyweight of the door. Since the pivot points support the door, one at the bottom and one at the top, there is no need to reinforce the door frame separately. However, it provides an amazing entrance to your room, which is more important than an ordinary door.

Bifold doors

The folding door has the advantages of elegant appearance, novel style and various colours. The folding door is easy to use, easy to push and pull, and can effectively save the space occupied by the door. Folding door has lightweight, heat and cold insulation, moisture-proof, fire-retardant, noise reduction and sound insulation, acid and alkali resistance, corrosion resistance and other chemical stability.

The folding door is a typical wooden frame and a full-size glass structure. In addition, it doesn’t take up too much space and is balanced with other components in the room.

The hinges of the doors are joined together, and you can see the beautiful folding door. The door is mounted on a metal track and hung on the head or top of the door. It helps open the room to the outside and is ideal for a home filled with natural light.

Dutch doors

The Dutch door has Dutch characteristics and it has a unique design with panels divided into top and bottom sections. They are divided horizontally, which makes it suitable for families with pets and children. Because you can open the top half for fresh air, while the bottom remains closed.

To use it as an ordinary door, you can bolt the two parts together.

The Dutch door can be used in the cooking area, even the front door, given that it has a powerful building.

The Dutch gate is still very popular because it has both the feel of the old world and the practicality.

Sliding doors

Moving doors are often known as bypass doors that are a must for homes that require a large opening like your closet or back patio. You cannot swing open these doors, but rather, you need to move them on a track. The door consists of steel rollers that are provided at the bottom and top that help to slide the door open gently.

This means that the door won’t protrude into your space, even if it’s placed in the bedroom balcony. It’s typically constructed with wooden frames and comes with full-sized glass construction. Plus, it doesn’t take over too much space and maintains a balance with the other components in the room.

However, you can access only a part of the opening at once. All in all, if you want a minimalist look with clean lines and a refined style, then this is a good bet. For installing sliding glass doors you can follow this link.

Barn doors

Although the barn door gives a perfect rural atmosphere, the light shield has become the fashion pillar of modern families and farmhouses.

The light shield has a retro charm, which helps to increase the separation and style of closets, bathrooms, bedrooms, etc.

You can combine it with high quality machined hardware and amazing architectural decorative glass to make it a completely amazing package. You can select the door material according to the desired door function. For example, wooden doors are the most common. They block light, reduce the line of sight, and help to close spaces more effectively.


We discussed the various types of wooden doors in the following aspects.

Types of wooden doors by materials. Generally, the hardwoods, softwoods and manufactured woods series. And the common species used for making wooden doors for each category. For example, Mahogany and African Cherry in hardwoods, and Pine and White Oak in softwoods. We also talked about the pro and cons of each. You will find more by reading the whole passage.

Types of wooden doors by styles. When it comes to styles, we introduced the 9 popular types, including:

  • Roller doors

  • Hinged doors

  • Pocket doors

  • French doors

  • Pivot doors

  • Bifold doors

  • Sliding doors

  • Dutch doors

  • Barn doors

If you like this article, don’t forget to share it. Keep following our posts and find more useful tips for windows and doors.

Sliding doors vs Bifold doors, which fit you the best


Thinking about buying new sliding doors vs bifold doors for your home?

Get more ideas about them from the detailed comparison and make your final decision.

What are sliding doors?

If you prefer sliding glass doors, it’s important to understand what they are and how they work. First of all, the sliding doors consist of two door leaves – one fixed door leaf and the other sliding open-door leaves.

Because it has a fixed door leaf, you can’t fully open the sliding doors. Only one of the two door leaves can open. Unlike traditional doors, sliding doors do not open outward or inward. Therefore, it is generally considered to be the ideal solution for aesthetics and space-saving.

EEHE sliding doors

What are bifold doors?

Bifold doors usually consist of two door panels. The two doors panels are of the same size. You can open both of them. These panels can be folded in one direction, or even in two directions. They are usually configured with active doors. You can use the door by opening one leaf of it.

The bifold doors is undoubtedly a popular choice because they blend two adjacent areas seamlessly together better than other types of doors. So they are most commonly used between living areas and outdoor entertainment areas. And the doors are of classic design because of their resort-like appearance.

EEHE bifold doors

Sliding doors vs bifold doors

Choosing between a bifold door and sliding doors could be difficult. Both of them are visually appealing, and each has its own advantages. Let’s compare the main differences between sliding doors and bifold doors.

The differences between sliding doors and bifold doors

Generally, sliding doors and bifold doors are different in the following aspects.

Let’s see sliding doors vs bifold doors.

Ways to open

You can open the entire area, and the door protrudes into the interior or exterior space. They can provide a seamless transition between the inside and outside of the house.

The sliding door has a fixed panel, so you can’t open all of it. However, they save place in this way. And the wind force wouldn’t affect the door.

Options for screening

Traditional bifold doors are difficult to shield. But now bifold doors can be fitted with a retractable screen.

The sliding door is easy to shield and additional rails can be selected for screen installation. And sliding doors are available in a variety of screen door types.

The door panels

You cannot install the large glass panels for bifold doors. But large glass panels match well with sliding door. Sliding doors have larger glass panels and thinner frames. So, the sliding door provides a more streamlined, uninterrupted view.

Options for configuration

Bifold doors are available in various configurations. For example, you can configure a double fold to have only one door open and the other panels slide in the other direction. This will allow you to choose to fully open the bifold door.

You can only open the sliding door to one side or another. It depends on the number of their panels.

The hardware

Bifold doors need more hardware and moving parts, such as rollers, hinges, handles and operating devices. And they require more maintenance. So, there is a subtle price difference between the sliding door option and the bifold door option.

Sliding doors require less hardware and materials than folding doors. This helps them to be easier to maintain and to find replacement parts.

The pros and cons | sliding doors vs bifold doors

Pros of sliding doors

Sliding doors can accommodate large glass panels, providing a wide view. In addition, it should be noted that the configuration of sliding doors is also wider than that of bifold doors.

As mentioned earlier, sliding doors do not protrude, they open and close in sequence. This makes them a very practical choice for saving places. In addition, they can accommodate screen windows, and they are easier to install than bifold doors.

There are more benefits of sliding doors:

They offer natural light transmission

Many people love sliding doors because they can let more natural light in the house. The standard sliding door consists of an aluminium frame that supports a large glass panel. And glass panels fill the entire frame, allowing more natural light to enter the room than traditional doors provide.

Sliding doors also provide you with a wide and unobstructed outdoor view. This creates a seamless flow between indoor and outdoor. My wife often tells me that sliding doors are one of the best investments we make at home. We can let the children play outdoors and look after them.

If you like outdoor scenery and want to make the most of natural light, use sliding doors. You can always use curtains or blinds when you want to be private or opaque.

Easy accessibility

The characteristic of a sliding door is their track. The door slides along the slide rail to open. This makes them incredibly easy to use, and they provide quick access to patios and outdoor areas. In addition, old people, children and even the disables can easily open them without any effort.

Sliding doors are usually twice the size of traditional doors. When you need to move furniture and other heavy objects around the house, sliding doors are the best choice. If you install sliding doors, you don’t have to worry about dents or paint falling from the walls.

Energy efficient

Sliding doors are very energy efficient and environmentally friendly. This makes them a reasonable choice for Perth’s “green” homeowners.

Sliding doors can effectively prevent dust, rain and airflow from entering your home, and they can also block heat. This will make sure your home stays cool in summer and warm in winter. Compared with traditional doors, sliding doors provide better energy efficiency.

Rose’s sliding doors use high-quality glass panels to provide excellent insulation. The toughened safety glass on our door also reflects heat. By installing our sliding doors in your home, you can achieve the maximum efficiency of your heating and cooling equipment.

Super attractive

Sliding doors look spectacular. They are smooth, simple and powerful. In addition, they will definitely add a little elegance to any home or office.

Opening a sliding door is much easier than opening a traditional door. You just slide the door gently.

Added security

Sliding doors are made up of two door panels, and it takes more time to open it than a bifold door. Even if it sounds unreasonable, sliding doors are safer than traditional doors.

In addition, there is a hook mechanism to ensure that the door is kept tightly closed and the lock is firmly in place. It takes a lot of effort to lift the door out of the frame. Moreover, if we want to break through the toughened safety glass, we need great strength. Thieves don’t even think about breaking in, they provide a solid barrier to entry.


Sliding doors work without any hinges and slide horizontally along the track. They don’t open, they don’t stick out of doors or out of doors. So you don’t need to keep extra reserves.

Notice that the sliding door consists of two panels, one of which remains fixed and the other open. This means that when fully opened, the two panels stack on top of each other. Although you need to sacrifice a little wall space, you don’t have to prepare for arcs.

Very reliable

Sliding doors are much more reliable than traditional hinged doors. Even if the sliding door happens to fall off the track, it is easy to install it back. The process is so simple, and even a child can do it without any help. However, if a bifold door falls off its hinges, it takes a lot of effort to put it back.

A sliding door is durable, excellent performance and high safety level. We use safety glass on the door, which is firmly held in place with high-quality gaskets and seals. Our doors are easy to maintain and available in 7 designer colours. Best of all, they are very affordable.

Cons of sliding doors

Although sliding doors have many advantages, they also have some disadvantages. If you want your sliding door panel to be larger, then your track width must be wider. This may lead to some problems. Especially when there are children at home, they increase the risk of tripping.

Pros of bifold doors

First of all, the appearance of the bifold door is exquisite, giving people a sense of modern luxury.

Then, the bifold door can be fully opened to provide you with a wide outdoor view. In fact, most outward-facing bifold doors can open up to 90% of a room. This can give you a big illusion of home. By installing double hinge windows, you can let the breeze enter your home without opening the bifold doors.

Here are more merits of bifold doors:

Increase visual appeal

It increases the visual appeal of their home and enhances the beauty of the whole house. Modern bifold doors offer a variety of colours and finishes. Therefore, you can customize the appearance of your door according to your preference.

Make rooms airier and brighter

The bifold door offers many functional advantages. By installing a bifold door, you can make your room airier and brighter, because you can be fully open them.

In addition, they provide better airflow than sliding doors. And allow natural light to pass through. So the indoor could be much brighter. You can also install a screen window in front of your bifold door to prevent insects and insects.

Expand your living space

Bifold doors take up very little space, so they also expand your living space. You can open the door as you like, making your living area more functional and attractive. So, bifold doors make a room look much bigger than it used to be.

Enjoy more views

If you have a great backyard around your home, the bifold door is definitely a nice option for you. The reason is, bifold doors offer you the flexibility to open either to one side or to both sides. And it allows you to enjoy seamless views from the outdoors. Whether your doors are open or close, you can have an expansive view of the outdoor area around your home. So, if you have a great backyard or a nice outdoor area around your home, you should definitely install bifold doors.

More energy efficient

The bifold door greatly increases the visual appeal and the convenience of a home. If you are looking for ways to increase the resale value of your home. Then installing bifold doors can be an effective solution.

Cons of bifold doors

However, they are expensive than sliding doors.

In addition, the double folding door can leave a gap. This may lead to water penetration.

Unlike sliding doors, bifold doors have limited shielding options.

Which doors fit me the best?

When you purchase a door, the type of door you choose depends on the size of the space, the view of the room, and the budget you have.

If you have a space that is likely to be open rather than closed, bifold doors are a good choice. They also look beautiful in smaller window openings such as side decks and bedroom balconies. Wider space is more conducive to the installation of sliding doors.

Please choose the best types of doors according to how you want to use them.


In this article, we mainly talked about the following points.

The differences of sliding doors vs bifold doors. Ways to open, options for screening, door panels, configuration options and the hardware.

The pros and cons of sliding doors vs bifold doors. A detailed description of various aspects.

With the above references, you will know more about the 2 popular types of doors. And then, make a decision on which one for your home.

If you find this article useful, feel free to share it. And keep your eyes on our upcoming posts for more tips on windows and doors.

Aluminium windows and doors vs uPVC

Aluminium windows and doors vs uPVC windows and doors


Aluminium windows and doors vs uPVC, which one is better? That’s the question you might have if you’re looking to buy new windows and doors for your home.

In this article, you’ll find a detailed comparison of the 2 major types on the market today.

The market of aluminium windows and doors vs uPVC windows and doors

The market for windows and doors is growing at a fast pace today.

windows and doors market

(source: gminsights.com)

According to the analysis above, the market for windows and doors are going to grow steadily in these coming years.

And the reasons are easy to understand.

As the growth of urban population, people need more homes and houses to stay. At the same time, governments are spending more money on commercial buildings.

As a result, the demand for windows and doors are posing a steady growth. You need windows and doors for every home after all.

Alongside, people’s requirement for windows and doors are different nowadays.

In the past, you might replace your windows and doors until they are damaged or broken.

But today, you will probably upgrade them with styles and designs that better fit your taste. Also, you might prefer better performances of your windows and doors, such as durability and thermal performance. And fortunately, the advanced technology has enabled that.

All these factors contribute to the growth of the market of windows and doors.

Aluminium and uPVC rank the top 3 materials for windows and doors

And among the various types of windows and doors by materials, the 3 remain the pop-stars in the game.

They are aluminium, uPVC and wood/timber.

And of course, the result comes with reasons. Basically, price and performance are the 2 keys.

We’re going to get down to the topic by the 2 materials: aluminium and uPVC.

Aluminium windows and doors vs uPVC windows and doors

Aluminium windows and doors: the pros and cons

EEHE aluminium windows and doors

The pros of aluminium windows and doors

Super durable. When it comes to durability, aluminium windows and doors definitely surpass their competitors. 20-50 years is just the average lifespan of the material. In other words, when you have the aluminium windows and doors installed on your houses. You won’t have to change them within 20 years unless you want to upgrade.

Weather-resistant. The weather-proof feature is another thing that makes aluminium stand out. Even in extreme weather like heavy rain and snow, quality aluminium windows and doors will remain strong and robust. And they are not sensitive to temperature differences. That’s why you see aluminium windows and doors in areas with large temperature differences, deserts for example.

Okay for large sizes. Aluminium windows and doors are compatible with larger sizes thanks to their physical nature. The material is amazingly strong. If you realize, windows and doors with huge sizes are basically aluminium. The reason is using other weaker materials will probably result in collapse or falling.

Larger view. As a result of their strength, aluminium windows and doors are available for slimmer frames. In other words, you’re going to have more views from aluminium windows from the big glass panels.

Low maintenance. You probably find your aluminium windows and doors remain new and clean over time. Several swipes in every few months can pretty much keep clean and beautiful.

Friendly to the environment. Aluminium is friendly to the environment because they are 100% recyclable. That is to say, aluminium windows and doors will not pollute the environment.

The cons of aluminium windows and doors

Poor sealing. Traditional aluminium windows and doors have poor sealing. The sealing strip on aluminium windows and doors will fall off after long-time use. And this leads to poor waterproof performance in rainy days.

But today, thanks to developed technology, there are reliable solutions to this issue. Just remember to find a good supplier of windows and doors like EEHE for quality products.

Lower thermal performance. The thermal performance of traditional aluminium windows and doors has got critics over the years.

However, manufacturers and designers never stopped looking for solutions. You will just need to look for the aluminium windows and doors with thermal breaks. The thermal break technology on the profiles can greatly enhance the thermal performance of aluminium windows and doors.

High price. The cost of aluminium windows and doors is higher than the uPVC. If you have a tight budget, you might not consider buying aluminium in the first place. But honestly, if your budget is good to go, aluminium windows and doors can save you a lot of money during the following maintenance.

Moreover, there is another way to make aluminium windows and doors more energy efficient.

That is using double or triple glazed glass for the panel.

According to a study, windows and doors with double glazed glass can save up to 115-120 Euros every year.

Find more about that on Windows and Doors Market in 2020 and Those Window Glass Can Meet Your Need For Home.

uPVC windows and doors: the pros and cons

uPVC windows and doors

The pros of uPVC windows and doors

Effective sound insulation. Compared with the use of aluminium windows and doors, uPVC material can better block the external noise. If you live in a noisy area, using uPVC windows and doors, you can create a quiet and comfortable space.

Corrosion resistance. It does not react with acid, alkali, etc., and does not need to be coated with anti-corrosion coating. It can save maintenance cost.

Durable. uPVC windows and doors are very durable and not easy to wear and tear. And it can be used for 20 to 30 years with little maintenance.

High efficiency and energy saving. The use of uPVC windows and doors can provide sufficient light for your home, keep warm and provide good ventilation. This will help you save on lighting and some other energy costs

Easy to degrade. uPVC material is easier to degrade than aluminium material and has less damage to the environment.

Low price. Compared with aluminium windows and doors, uPVC windows and doors are cheaper and more affordable. Because uPVC door and window material and manufacturing costs are lower than aluminium windows and doors. If your budget is not enough, uPVC windows and doors are a good choice.

Various colours and finishes. For uPVC windows and doors, you can choose colours and finishes according to your own preferences. And you can buy uPVC windows and doors with a wood grain finish.

The cons of uPVC windows and doors

Heavy and thick. uPVC windows and doors usually come with a heavier weight and thicker frames. This is a result of their physical features. Without the weight and thickness, a uPVC window or door will not be safe enough. They are not as strong as metal after all.

Less view is available. Because of the thick frames, the glass panel areas on uPVC windows or door are smaller. Thus, you can enjoy less view through uPVC windows than the aluminium ones.

The manufacturing process of aluminium windows and doors vs uPVC

The manufacturing process of aluminium windows and doors

Order profiles. To reduce the operating costs of the manufacturing industry, almost all Chinese aluminium door and window manufacturers order profiles. And they will choose the factory close to the extrusion plant to reduce the transportation cost of aluminium materials.

Shape processing. Shape processing includes blanking, punching, stamping, drilling and milling. The quality of the machine and the skills of workers will have an important impact on the smooth completion of the contour processing technology. Besides, in the process of profile processing, the use of advanced hot cracking technology is the key to profile processing. Because the profile with a thermal insulation layer will make you feel warmer in winter, and reduce your worry about the low heat performance of traditional aluminium windows and doors.

Installation accessories. Aluminium alloy windows and doors are composed of many accessories. High-quality aluminium alloy door and window accessories are used. Each accessory is very small, but a series of accessories constitute windows and doors. Although the accessories are small, they will affect the quality of windows and doors. Good accessories can provide security for windows and doors, so every detail can not be ignored.

Install glass. Using three-layer glass can save more water and electricity bills because it has better thermal insulation, can reduce noise and make you warmer in winter. However, not every manufacturer of aluminium windows and doors can provide double/triple glazing for their products, however, EEHE offers double and triple glazing on aluminium windows and doors.

Complete product assembly. When the glass installation is completed, the manufacturer will complete the manufacturing process by completing the final product assembly.

The manufacturing process of uPVC windows and doors

Forming resin compounds. Moulding resin compound is the first step in manufacturing uPVC windows and doors. At this stage, the manufacturer mixes raw materials to prepare resin compounds. Manufacturers add two chemicals (TiO2 and CaCO3) to make the material more durable and UV resistant. It can ensure that uPVC windows and doors are also very strong in the sun.

Extrusion and cooling. The success of extrusion moulding is the key to the structure of uPVC windows and doors. The success of extrusion depends largely on the temperature. The manufacturer will use large-scale automatic mixing equipment to ensure that the extrusion process can work at 200-275 ℃ and the mixing is accurate. The factory will then pour the molten mixture into the mould. Then the mould will give the shape of the extruded uPVC material. To make the uPVC material strong and firm, after extrusion moulding, the manufacturer will immediately cool uPVC and give it a water bath.

Cutting and joining. In this process, the manufacturer will cut the material into standard shape according to the customer’s requirements, and connect the parts by hot-melt welding.

Galvanized steel bar. To strengthen the structure of the uPVC door and window profiles. The manufacturer will install galvanized sections in the profiles.

Install the glass. The manufacturer will assemble the glass to the profile until the glass is installed.

Aluminium windows and doors vs uPVC, which one is better?

The answer to the question pretty much depends on your demand and preferences.

Both Aluminium and uPVC windows and doors have their own advantages and disadvantages.

When choosing windows and doors, thermal efficiency and safety are two very important factors.

However, with the development of technology, the thermal performance of the 2 types remain little different from one to the other. Just remember to choose a reliable supplier with quality production.

As for safety, aluminium windows and doors are always safer than uPVC in the long run. They are stronger and more resistant to extreme condition after all.

On the other hand, the cost is another factor to consider for your purchase of windows and doors.

The cost of the 2 is largely different due to the difference in the production process.

In the past 10 years, aluminium windows and doors have made great progress in economy, durability and thermal efficiency, and we expect that they will only continue to be popular.

At the same time, uPVC windows and doors always have a place in the market due to its low price.

If you’re looking for durable windows and doors, aluminium is a good option, especially for large sizes.

Meanwhile, if you expect to replace your windows and doors every couple of years, you might go for uPVC. Also, uPVC windows and doors can save your money for the first payment. You might pay more attention to the maintenance later on though.

China is the place to go for buying windows and doors

When selecting windows and doors, you pretty much make the choice according to your personal preferences and budget. At the same time, you might consider buying from reliable manufacturers. We believe you want your windows and doors to get along with your home instead of regular repairments.

All in all, Chinese window and door manufacturers are excellent in the industry. And they require lower costs while offering the same quality. Competitive prices come with a wide range of choices, including materials, styles, glass and other special requirements.

If you’re interested in this topic, know more about buying windows and doors in China.


So, we talked about the following topics in this article today:

The current market and forecast of windows and doors. The market is likely to pose steady growth by 2026. And aluminium, uPVC and wood/timber rank the top 3 among the various materials.

The pros and cons of aluminium windows and doors vs uPVC.

The manufacturing process of aluminium windows and doors vs uPVC.

How to choose between aluminium windows and doors and uPVC. The things and criteria to consider.

If you like this article, please do share with your friends. Invite them and keep following our blogs for more news and tips of windows and doors.

How to clean windows and doors to prevent the COVID-19

How to clean windows and doors to prevent the COVID-19


Since the end of December 2019, the COVID-19 has spread to all over the world. And is prone to recurrence. In fact, cleaning windows correctly and effectively do help with the COVID-19 prevention. So, let’s take a look at how to clean windows and doors to prevent the COVID-19? And what to do during the COVID-19 to protect ourselves and our family?

10 tips on how to protect yourself during the outbreak

How to clean windows and doors to prevent the COVID-19: We can do it

1、Wash hands frequently and maintain good respiratory hygiene

  • Use soap or liquid soap to wash your hands with running water.

  • Wipe your hands with disposable paper towels or clean towels.

  • Wash hands immediately after touching respiratory secretions, such as sneezing.

  • Maintain good respiratory hygiene:

When coughing or sneezing, cover your nose and mouth with a tissue or towel. Wash your hands after coughing or sneezing.

Avoid touching your eyes, nose, or mouth with your hands.

2、Enhance physical fitness and immunity, keep the environment clean and ventilated

  • Enhance physical fitness and immunity, balanced diet, moderate exercise, regular exercise, and avoid excessive fatigue.

  • Open the window every day for not less than 3 times, 20 to 30 minutes each time. When the outdoor air quality is poor, the frequency and time of ventilation should be appropriately reduced.

3、Minimize activities in crowded places and pay attention to symptoms

  • Try to minimize activities in crowded places.

  • Avoid contact with patients with respiratory infections.

  • If you have symptoms of respiratory tract infections such as cough, runny nose, fever, etc, you should stay at home and rest.

  • If you have a continuous fever or the fever gets worsen, you should go to see a doctor as soon as possible.

4、The role of handwashing in preventing respiratory tract diseases

Both the Chinese Center for Disease Control and Prevention and the World Health Organization recommends washing hands with soap and running water.

5、Steps to wash your hands correctly

  1. Rub your hands together with your palms (Fold your hands together and rub five times)

  2. Cross your hands and wash your finger joints.

  3. Rub five times each for your right and left hands.

  4. the palms are interlaced with ten fingers and rub five times.

  5. Put your fingertips in the palm of your hand and scrub each other each for five times.

  6. Hold the thumb of the other hand and scrub five times each for right and left hands.

  7. Bend your fingers, rotate and scrub the joints in the palm of the other hand, and scrubs five times each for right and left hands.

6、When do we need to wash hands

  1. Before and after transferring files

  2. After coughing or sneezing

  3. Before, during and after preparing food

  4. Before eating

  5. After going to the toilet

  6. When your hands are dirty

  7. After contacting others

  8. After being in contact with animals

  9. After being in contact with animals

  10. After going back

7、What to do in inconvenient situation to wash hands?

Coronavirus is not resistant to acid or alkali. So, You can use alcohol-based disinfection products to wash your hands. 75% of alcohol can inactivate viruses. And you can use a certain concentration of alcohol-containing disinfection products as a substitute for handwashing.

8、How to choose a mask?

  • Choose a disposable medical mask when going out normally. And replace it for every 4 hours. You should replace it immediately after getting dirty or wet.

  • Choose to use N95 medical protective masks when going to the hospital or in crowded areas. You can wear them for 4 hours and then have to replace them. If they are dirty or wet, replace them immediately.

  • Not recommend cotton masks and sponge masks.

9、Correct use of masks

How to use medical masks:

  1. The darker colour of the mask is the front, and the front should face outward. There is a metal strip for nose clips in a medical mask.

  2. The lighter side is the reverse side of the medical mask. It is toward the face. Besides, the metal strip should be above the mask and do not wear it backwards. And then, wash your hands and hang the ropes at both ends of your ears.

  3. Finally, press the metal strips on the nose bridge with your hands to make the upper end of the mask close to the nose bridge. And then stretch the mask down to cover the nose and mouth.

10、How to wear masks for special people

  • Pregnant women should pay attention to their conditions and choose products with better comfort.

  • The elderly and patients with chronic disease will cause discomfort after wearing masks, and even aggravate the original condition. Seek professional guidance from a doctor.

  • Children in the stage of growth have small faces, so choose child protective masks.

How to clean windows and doors to prevent the COVID-19

How to clean windows and doors to prevent the COVID-19

Why cleaning windows and doors can prevent the COVID-19

During the COVID-19, we should enhance the sense of self-prevention. And good indoor ventilation is important for COVID-19 prevention.

Opening windows and doors for ventilation can not only effectively reduce indoor viruses, but also fresh indoor air. Fresh air is conducive to our health and enhances the body’s resistance.

So, it’s important to learn how to clean windows and doors to prevent the COVID-19.

If the windows and doors are not opened to ventilate for a long time, the enclosed space is prone to breeding viruses and bacteria. It will increase the risk of infection.

Let’s see how to clean windows and doors to prevent the COVID-19.

How to clean

  1. Clean the window frame with a soft cloth. If the window frame is particularly dirty, you can make clean detergent. Mix the detergent, soapy water, and warm water according to a certain ratio. If it is an aluminium window, use a neutral detergent to clean it. Soapy water or washing powder can corrode the window frames of aluminium windows.

  2. Soak a soft cloth in the clean detergent, gently wipe off the stains and dust on the window frame, and then wipe it off with clean water.

  3. Wash a soft cloth and soak with a suitable amount of disinfectant. And then wipe the window frame carefully to effectively kill bacteria and germs. Finally, wipe it clean with clean water.

  4. Now, start to clean the window glass. Soak the sponge in the clean detergent. And then use the sponge to wipe the glass. Make sure to clean all corners and gaps of the window. After cleaning, use a window cleaner to remove the solution and traces on the window, and wipe it off with a clean soft cloth.

  5. Repeat step 4 with disinfectant, and wipe it with a clean soft cloth.

  6. Clean doors follow the steps of windows above.

That’s how to clean windows and doors to prevent the COVID-19. For more details on how to clean windows, you can also read how to clean aluminium windows

When cleaning windows, be sure to scrub from right to left. In this way, you can wash the stains on the window surface more efficiently.

Don’t lean on the doors and windows, because the doors and windows have compression limits. Overweight may cause deformation of the doors and windows.

How to choose a disinfectant

For more about how to clean windows and doors to prevent the COVID-19, how to choose a disinfectant is important. Disinfection can kill pathogenic microorganisms on the surface. An alcohol solution with an alcohol content of at least 70% can be used. And in fact, properly diluted household bleach can effectively kill coronavirus. You can use diluted household bleach as disinfection. If your bleach sodium hypochlorite concentration is 5%-6%, and ensure the product has not expired. It can be used as a disinfectant.

However, some bleaching agents are not suitable for disinfection. Such as bleaching agents that can be used safely on coloured clothing or used for whitening.

Then, how to make the diluted household bleach?

You can mix 5 tablespoons (1/3 cup) of bleach per gallon of room temperature water. The disinfection effect of bleach can be up to 24 hours. An alcohol solution with an alcohol content of at least 70% can be used.

But,here some tips to be careful:

l Use the product according to the manufacturer’s instructions and ventilate accordingly. Never mix household bleach with ammonia or any other cleaning agents.

l Leave the solution on the surface for at least 1 minute.

Living tips you should know during the outbreak

Living tips during the COVID-19 outbreak

Beside how to clean windows and doors to prevent the COVID-19, what aspects we should pay attention to ?

Personal protection measures

l Use soap or handwashing fluid and wash your hands with running water. Wipe your hands with disposable paper towels or clean towels.

l When it is not convenient to wash your hands, you can use alcohol-based disinfection products to clean your hands.

l Maintain good hygiene habits:

Cover your nose and mouth with a tissue or towel when coughing or sneezing. Wash your hands after coughing or sneezing. And avoid touching your eyes, nose, or mouth with your hands.

l Enhance physical fitness and immunity.

l Eat a balanced diet, exercise regularly, and work regularly to avoid excessive fatigue.

l Keep the environment clean and ventilated:

Open the window several times a day for no less than 3 times, 20-30 minutes each time. But when the outdoor air quality is poor, reduce the frequency and time of ventilation

l Minimize activities in crowded places as much as possible.

l Avoid contact with patients with respiratory tract infections.

l If symptoms of respiratory tract infections occur, such as cough, runny nose, fever, etc., you should rest at home for isolation. Seek medical attention as soon as fever persists or symptoms get worse.

How to eat during COVID-19

  1. Do not eat animal meat and their products that are already sick;

  2. purchase chilled poultry meat from regular channels, and fully cook them when eating poultry meat and egg-milk.

  3. Separate cutting boards and knives for handling raw and cooked food.

  4. Wash your hands between handling raw and cooked food

  5. Even in areas where the COVID-19 occurs, if the meat is thoroughly cooked and properly handled in the food preparation process, it can be safely consumed.

How to prevent COVID-19 in public places

  1. Avoid contact with farm animals or wild animals without protection.

  2. Maintain constant indoor ventilation in the workplace. And for crowded places, such as shopping malls, buses, subways and aeroplanes, wear masks to reduce the risk of exposure to pathogens.

  3. When coughing or sneezing, completely cover your nose with a tissue or sleeves or elbows.

  4. Throw the used tissues immediately into the closed trash can. After coughing or sneezing, wash your hands with soap and water or alcohol-based handwashing fluid

  5. Wash your hands in time after going home.

  6. Avoid all kinds of gatherings as much as possible during the COVID-19.

Personal cleaning

  • During the COVID-19, we should clean the room even more.

  • Clean the ground every day and drag it with a mop to prevent the dust on the ground from entering the respiratory tract.

  • Occasionally, disinfect the room with vinegar or alcohol as if spraying. It is helpful for sterilization.

  • In the morning, even five minutes, open the window to ventilate even five minutes.

  • Clean the bed and sofa. Reduces the growth of mites and bacteria


Preventing the COVID-19 in daily life has become an essential part of our lives. It is very important to learn to protect yourself when the outbreak occurs.

During the COVID-19, we should do personal cleaning well. For example, wash hands frequently and correctly, wear masks when talking to others or in the public area, disinfect our room including doors and windows regularly, eat cooked food and deal with the food correctly.

Cooperate with the government and doctors to prevent the COVID-19. For instance, avoid going out for crowded activities, seek professional help if you have a fever.

If this article helps you out with how to protect yourself during the outbreak, and how to clean doors and windows to prevent the COVID-19. Please share it with your friends to pass the news around.

EEHE PVC MDF wooden front door

Why choose wooden front doors?


For security reasons, the front door of a house needs to have an anti-theft function. Usually, we install two doors as front doors. The common front doors of modern houses are security doors and wooden doors. For the most part, why choose wooden front doors?

With the rapid development of the real estate, there are more and more types of wooden doors, and there are many advantages that other door types do not have. Under this circumstance, what are the types of wooden doors in the current construction market? What should we pay attention to when buying?

In any event, these questions are very important for people who don’t know much about wooden front doors when they need to buy one.

By and large, the information below may help it out.

Types of the wooden front door

Hollow-core timber doors

EEHE hollow-core timber door

What is

Generally, a hollow core timber door is built with a hollow core. It looks much like a solid wooden door, thus, it’s an alternative to solid wooden doors.

Frames of hollow-core timber doors are usually made of hardwood or pine. There are sturdy lock blocks on both sides of the door to install handles and other door trims on both sides of the door.

The interior of the door is filled with waste paper or cardboard grids or honeycombs. And the internal honeycomb structure can provide sufficient strength.

The panelling on the door is related to the insulation and strength of the door. According to the difference in exterior panelling of the door, the appearance of the door is different.

As for the weight of hollow-core timber doors, they are lighter than solid wood doors and cheaper than them.

Hollow-core timber doors can be added with specific panelling, veneer, and style, so the style of the hollow wooden door is diverse.

You can add specific panelling, veneer to hollow core timber doors, so the style of hollow-core timber doors is diverse.


At present, the most common types of hollow doors are traditional hinged doors, and sliding doors. You can add specific panelling, veneer to hollow core timber doors, so the style of hollow-core timber doors is diverse.


The outer panelling of the door provides sufficient strength and protection, so hollow doors can also be used as outdoor doors.

However, due to relatively poor strength of hollow-core timber doors, they have poor insulation. Generally, they are not as good as solid doors in other aspects. Therefore, hollow core timber doors are most commonly used as interior doors.

The hollow structure of hollow-core timber doors is more conducive to sound transmission, so its sound insulation performance is relatively poor.

Due to hollow structures of hollow-core timber doors consume less wood material, they are much cheaper than other types of wooden doors. By the same token, hollow core timber doors are much lighter and easier to install than solid wooden doors.

As for thermal insulation and weatherproof performance, hollow core timber doors don’t have much effect on them, unless they are specifically designed for this purpose.

Solid wood internal doors

EEHE solid wood internal door

What is

Solid wood internal doors are made from the same tree species, and decorate its surface with decorative veneer.

Due to the difficulty to collect same tree species for a door, the solid wood internal door is made of a piece of spliced wood, and then processed in appearance.

Whether in terms of material or quality, solid wood internal doors are the best in wooden doors. Therefore, the price of real solid wood internal doors is relatively high.


There are two types of solid wood internal doors:

The first one is log solid wood doors. They are made of natural logs from the forest, without sticking patch to the veneer and the board.

Another type is solid wood composite doors. The material of the core is made of Chinese fir or other mixed wood pressed density board with veneer.

The solid wood composite doors are made of solid wood as the door frame, and the two sides are bonded with decorative panels.

The frames of solid wood composite doors are made of solid wood. And for two sides of the frames, they are bonded with decorative panels.

As can be seen, solid wood internal doors are widely used in home decoration.


It has high hardness, good gloss, no deformation and anti-aging. It is a high-end luxury product.

As for its performance, there is moisture-proof, anti-fouling, heat-resistant, crack-resistant, strong and non-deformed, good sound insulation effect. By and large, it is a durable product.

It is an excellent green and environmentally friendly product. Since it is non-toxic, odourless, free of formaldehyde and toluene, and there is no radiation pollution. That will good for your health.

Because wood carving has a long history and mature technology, the solid wooden door is artistic, noble and elegant.

PVC coated wooden door

EEHE PVC coated wooden door

What is

PVC coated wooden door is a door formed by PVC veneer on the outermost surface of a solid wood composite door or a moulded door.

Door covers are also deal with PVC veneers. This eliminates the need to paint on the door. The price is relatively cheap compared to hollow wooden doors and solid wooden doors.

Form the outermost surface of a solid wood composite door or a moulded door with PVC veneer, and Such a door is called a PVC coated wooden door. The door cover of the PVC coated wooden door is also covered with PVC. Under this circumstance, there is no need for painting the door surface. Thus, it is more eco-friendly and has better energy efficiency.


People can choose wooden doors according to their personalities and the style of the house. Thereupon, PVC coated wood doors have various styles.


PVC coated wooden doors don’t have to be painted, so the surface is smooth, bright, and has various colour. In that case, PVC coated wood doors can add a modern sense to the wooden door. In like manner, the PVC coated wood doors avoid the harm of the toxic gas and they are very eco-friendly.

Because of the PVC surface, PVC coated wood doors have the advantages of non-self-combustion, moisture and insect resistance. So it has strong durability and can be fireproof.

However, as time goes by, PVC coated wood doors with poor quality are prone to be easily affected by factors such as humidity, temperature and air. That will cause the deformation of their surface.

For more information about the types of doors and windows, please visit Guides on home door and window

Why use a wooden door

Many families would like to use wooden front doors, let’s take a look at the reasons.

Benefit or advantage of using wooden doors

There are many advantages to using wooden front doors.

Due to its long history and mature production technology, it has many types and styles to match the styles of houses. And wooden front doors are practical and durable.

Compared with doors made of other materials, wooden front doors are safer and environmentally friendly.

Steel vs wooden front doors

Steel front doors and wooden front doors are two common types of front doors. Let’s see the difference between them.

Nowadays, there are many styles of home decoration. Due to the mature technology of the wooden front doors, the appearance of them can be very beautiful, and the material of the wood is very versatile.

However, steel front doors only have a single cold steel colour. That is difficult to match well with the various home decoration styles.

The material of the wooden door is taken from natural, the performance during use is relatively stable. As long as the correct maintenance is carried out, it can be used for a long time and remains brand new. Otherwise, The steel door will rust or be scratched during use. The material of steel may also scratch people.

As for the strength and anti-theft performance of the doors, steel front doors are better than wooden front doors. It’s widely used for outdoor doors of entrance doors.

Aluminium vs wooden front doors

The wooden front doors are made of solid wood. Hence, they have thick door panel and high density, so the wooden front doors can effectively play the role of sound insulation.

Aluminium doors are mainly composed of aluminium, glass, and hardware accessories, with high sealing and insufficient thickness. Therefore, the sound insulation is not as good as the wooden door.

The oxidized layer of aluminium door is not easy to fall off and fade, whereas the material of the wooden front doors is relatively poor in water and moisture resistance. So aluminium doors are more resistant to corrosion than wooden front doors.

Compared to aluminium doors, the price of wooden doors made of natural materials is more expensive.

How to maintain wooden doors

Since it is easy to scratch the surface with the hard cloth to removing stains on the surface of the wooden front doors, use a soft cotton cloth to wipe it away.

use neutral lotion, toothpaste or special cleaning agent for furniture to clean the difficult stains. And they dry the door.

Never rinse wooden front doors with water.

Do not open the door lock with wet hands. Meanwhile, pay attention to the rag soaked with neutral reagent or water. Do not leave it on the surface of the wooden front doors for a long time. Otherwise, it will invade the surface and discolour or peel off the surface finish material.

Do not hang heavy objects on the door leaves, and avoid bumping or scratching the door with sharp objects. When opening or closing the door leaf, do not use excessive force to open, close or beat the wooden front doors.

Be careful not to rub the corners of the wooden door too much, otherwise, it will cause the corner paint to fall off.

The accessories and the hinge position of the wooden front doors should be tightened immediately when they are loose,

Add an appropriate amount of pencil lead to the keyhole if the lock is not flexible.

To remain the bright colour of the wooden front doors, you can wax them regularly.

Keep the indoor well ventilated especially in spring and winter. And keep the wooden front doors in the normal temperature and humidity environment. It can prevent the wooden front doors from being deformed due to excessive humidity and ring of temperature.


Wooden front doors often add natural elements to the room and refresh our mind.

There are three types of wooden front doors: Hollow core timber doors, solid wood internal doors, PVC coated wooden door.

Compared to steel front doors and aluminium front doors, wooden front doors still has a lot of merits in appearance, performance, and durability. They are more easily to match your home.

The price of a good door is also expensive, and it requires correct and proper maintenance. Suitable maintenance can not only give you a better experience with the wooden front doors but also can increase their service life.

If you find this article useful, please share it with your friends, and follow our blogs. There is following news about windows and doors. See you next time!

home door and window

Guides on home door and window


Doors and windows are required for house repairs and newly built houses. But the door and window market is large, and it has developed fast in recent years. It is not an easy thing to choose the home door and windows for people who are busy with work or unfamiliar with the home door and windows market, especially the suitable ones for their houses. A guide on door and windows is necessary now.

Compared with other furniture, home door and windows have a more important function. They have a long service life and are not easy to replace. Therefore, it is important to choose a door and window with good quality, durability, and suitable for your home.

Let’s check out what home door and windows are in the current home door and windows market, how to choose home door and windows, and how to maintain and replace them.

Types of home door and window #1: Door

Now there are four popular kinds of home doors. Let’s take a look.

Wooden doors

Timber composite door

The door core of timber composite doors is mostly made of pine, fir or imported filler materials.

Generally, high-grade timber composite doors have high-quality white pine cores and wooden veneers on the surface. it is easier to control the moisture content, due to the small density and lightweight of white pine. Therefore, the weight of the door is lighter, and it is not easy to deform and crack.

Timber composite doors feel smooth and have soft colour. It is very environmentally friendly, durable, thermal insulation, impact resistance, flame-retardant, and sound insulation is the same as wooden doors.

Original wooden door

Original wooden doors refer to wooden doors made from selected natural wood. The materials of the components of the door leaves are all made from wood with the same tree species, both inside and outside.

There are lots of advantages of original wooden doors. It is made of natural and precious wood. The material of the original wooden door is generally a precious tree species. It has a very good texture. The processing technology is carefully sculpted and looks more luxurious.

The amount of adhesive used in original wooden doors is reduced by nearly 50% compared to timber composite doors, so the formaldehyde emission of a good original wooden door is far below the national standard.

Among various types of doors, original wooden doors are heavy, high density and have thick door panels. So the sound insulation effect of them is best.

Folding doors

EEHE folding door

Folding doors are multi-folded doors. They can be pushed to the side. So they occupy less space.

It is mainly used in workshops, shopping malls, office buildings, exhibition halls and home.

Both the inner and outer of a house can install folding doors. And it has a lot of merits.

  • The folding door is light, free to push and pull, and effectively saves the occupied space.

  • The door is heat and cold insulation, moisture-proof, fire and flame retardant, noise reduction, sound insulation, acid and alkali resistance, corrosion resistance.

  • It is non-sticky, easy to clean, and suitable for kitchen, bathroom, toilet.

  • Original wooden doors are easy to maintain and have a long service life.

  • The installation of the original wooden doors is simple.

However, the tightness and thermal insulation are slightly worse than other types.

Components of them such as pulleys and hinges are easy to wear. So they require high-quality accessories.

Swing doors

EEHE swing doors

The spring door relies on their elasticity to open and close the door, and is also called “automatic door”. it will close automatically after opening. Generally, the track of the swing door is made of high-strength, wear-resistant aluminium.

Due to market reasons and the swing door is easy to hurt the head of a person when closing, it has been rare in the home door and windows market.

Sliding doors

EEHE sliding door

Sliding doors refers to doors that can be pushed and pulled. They are commonly used in families.

With the development of technology and the diversification of house decoration methods, sliding doors have glass, fabric, rattan, aluminium alloy profiles, folding doors, partition doors, and The function and use of sliding doors is expanded.

A smooth and silent sliding door can be installed on the balcony to enjoy the sunshine and scenery.

Install a smooth, silent sliding door on the balcony. Then you are luxuriating in sunshine and scenery.

More information about types of wooden doors, pleas visit why choose wooden front door?

Types of home door and window #2: Window

The development of windows in recent years is also rapid. Let’s see which windows are available for home decoration.

Aluminium awning windows

EEHE aluminium awning windows

Aluminium awning windows are slim, so you’d better think twice when choosing.

Due to its functional design, aluminium awning windows are ideal for kitchens where windows cannot be easily accessed.

Another feature of the aluminium awning window is that they can be opened partly open during inclement weather to allow continuous ventilation and don’t let in any of undesirable natural elements.

The aluminium awning window also has many merits.

  • Its hinges can increase its strength.

  • Lockable key winder of it can improve safety.

  • Has a foldable handle to avoid blind window shades.

  • Suitable for windy days.

Casement windows

EEHE casement windows

The hinges of the casement window are on the side of the window. And you can open it inward or outward.

Casement windows have many advantages. The opening area of them is large. And the ventilation, sealing, sound insulation, heat preservation, impermeability of them is excellent. It is convenient to clean, and they don’t take up space when it is opened outward.

However, casement windows have some disadvantages.

  • They are small normally, and the view of them is not wide.

  • The opening parts of the outer window are easy to be damaged on the windy days.

  • The inner parts of the windows occupy some space of the house.

  • It’s not convenient for the use of a curtain.

  • Rain may also seep in the house if the quality is not good enough.

Casement windows are widely used in urban commercial, residential buildings, villas and other mid-to-high-end buildings.

Sliding Window

EEHE sliding window

The sliding window has a pulley on the sash. It can slide on the track of the window frame to open or to close.

They are push-pull windows, so it’s flexible to open them. They don’t occupy other spaces of the house.

However, you can open only 50% of the sashes at most. And the airtightness of the closed window is poor. So they are rarely used in developed countries.

How to choose the right home door and window fitting your style

Compared with other furniture, home door and windows assume more essential functions. So it’s important to choose a good home door and windows.

Lots of people may ask: How should I choose the right style windows and doors for my home? What should I pay attention to? Let’s check it out together.

How to choose the right home door and window #1: Door

Function of doors

In addition to considering the security factors of anti-theft, the entrance door can choose a beautiful, strong and heavy wooden door.

Create a warm atmosphere and private space for bedroom is necessary, so the poor light transmission door is more suitable.

A door with good sound insulation effect, light transmittance and strong design sense are well-suited with a study room. Such as a wooden door with an ancient window rib pattern and it looks more elegant.

A door with good waterproof and tightness is appropriate for the kitchen, to effectively block the oil fumes generated by cooking.

focus on privacy and water resistance when you choose a door for your bathroom.

Quality of doors

It’s hard to ensure the quality of doors through the production process by visiting manufacturers. But They can also assess the quality of the product through simple visual inspection:

Check the frame, panel, and corners of the door with your hands to ensure the door is soft, delicate, and no scratching. Then stand on the side of the door toward the light to see if there are uneven waves on the painted surface of the door. By these two methods, And consumers can buy a door with good appearance quality.

Paint is one of the factors that must be considered. It directly affects the texture, moisture resistance, environmental protection, and durability of the door.

The high-quality living room door is also made of high-quality hardware accessories. You can open the door freely without noise.

You can open the closed package at first when buying doors, and smell whether there is a pungent odour. High-formaldehyde-released doors cause tears and sneezing

Brand of doors

Try manufacturers with good brand reputation is a better choice. The relevant qualification certifications of them ensure the relevant industry standards and the qualified release of various harmful substances.

Style of doors

Consider the overall design and coordination of the living room. If you use straight lintel above the door, use straight lintel, and if you use arc lintel, use arc lintel. The size, height, width of the door, position of the lock, and the shape of the door lock are as coordinated as possible.

How to choose the right home door and window #2: Window

Windows are indispensable in home decoration. Let’s take a look at how to choose windows.

Aluminium of windows

The national standard of window thickness is 3mm.

n order to reduce the cost of products, many manufacturers use the second best, which is difficult to identify with the naked eye. To prevent bad windows from being bought, it is best to look at the relevant product materials book.

Many manufacturers use unqualified aluminium to reduce the cost of products. It is better to look at the relevant product material manual to avoid unqualified windows.

Glass of windows

Insulating glass can effectively enhance the sound insulation effect and thermal insulation effect. The powerful sound insulation effect can resist the noise of the city.

Tempered glass conforming to the national standard will have the 3c safety certification. Meanwhile, it is necessary to check the authenticity of the certifications

Composite film

The composite film has corrosion resistance, wear resistance, high gloss, and also has a certain fire protection function. So choose windows with the qualified composite film is necessary.

Window sealing

There are no gaps in the splicing part of windows of good sealing performance. And windows with poor sealing performance not only leak wind and rain but also easily break the glass of the window.


There should be no colour difference on the surface of components of windows, and there should be no burrs and other stains, and there is no adhesive overflow at the assembly connection.


Generally, the price of high-quality home door and windows is 30% higher than that of normal home door and windows.


Choose manufacturers with a good reputation and service quality. They are more standardized in product quality and service system.

Way to purchase

Online shopping:

Online shopping has a cheaper price and more types to choose from. And it is easy to buy the home door and windows cost-effective and suitable for your house.

However, we must negotiate with the seller about transportation, installation and after-sales issues.

Offline shopping

Offline shopping may have a limited choice of home door and windows and more expensive price. And it takes a lot of time and effort to choose.

The advantage is that there are fewer problems in transportation, and installation and after-sales are more secure than online shopping.


According to the style of your house and your budget, choose the good sealing, qualified, eligible home door and windows as you like.

Maintenance for home door and window

Anything will gradually damage without maintenance. And suitable maintenance can also increase the longevity of home door and windows, making the doors and windows look cleaner and more beautiful. Now let’s take a look at the maintenance strategies for home door and windows.

Suggestions for maintenance

Hinges, door locks and other frequently moving hardware accessories should be tightened in time.

You can add an appropriate amount of lubricant such as a pencil lead to the keyhole for lubrication once every three months.

Wet the stains on the surface of the wooden door and wipe it with a soft cloth. Don’t use hard cloth. It can easily scratch the surface.

Use neutral detergent, toothpaste or furniture-specific cleaning agent to clean the particularly stubborn stains.

Wipe the wooden door immediately after decontamination.

Use a vacuum cleaner to remove the dust on the wooden doors.

To maintain the surface gloss and service life of the wooden door, it should be clean once every two months.

Use a special curing liquid for wooden decoration products to maintain the surface of the wooden doors.

Keep the indoor well-ventilated, and keep the safety door at a normal temperature, humidity environment. It can prevent the safety door from being deformed, and metal accessories from erosion, edge banding, and falling of.

Tip for maintenance

Do not hang heavy objects on the door leaves and avoid bumping and scratching with sharp objects. Do not use excessive force to open and close home door and windows

Do not open the door lock with wet hands, or splash corrosive solvents on the wooden door and the door lock.

Do not use excessive force for door locks and handles.

Do not allow the cleaning agent or water to penetrate the gap of the glass bead.

That may deform the bead.

Do not use excessive force to wipe the glass. That will damage the glass or hurt yourself. Call a professional person to repair the damaged glass.

Do not rub the corners of the wooden doors frequently. It will discolour and damage the decorative materials of the corners.

A regular time of home door and window maintenance

Clean home door and windows once a month

Maintain home door and windows every three months.

For more details of how to clean and maintain aluminium windows.

How to replace home door and window

Replacing the window is a decoration project. It requires a high level of craftsmanship and cares for workers.

Once the installation is not suitable, rain and water seepage will occur.

What should we pay attention to when replacing the window?

Let’s check it out together.

The steps of the home door and windows replacement

  1. Remove doors and windows: Use a screwdriver, hand hammer and other tools to remove the doors and windows first. put them down gently after removing. And don’t push them down from height strictly.

  2. Remove door and window frame: Use a blade to cut the sealant. If the doors and windows are connected to the wall with expansion bolts, remove the expansion bolts directly with a screwdriver

  3. Clean and repair the place where doors and windows are installed.

  4. Fixed bracket.

  5. 2 Fill the gap between the frame and the wall with styrofoam. Cut off the excess styrofoam after cured.it usually takes 2-3 hours, and it takes longer in winter.

  6. Install home doors and windows and other accessories.

  7. Apply sealant evenly around the door and window frames.

Tips of the home door and windows replacement

  • Check door and window materials before replacement.

  • Be careful of placing home door and windows.

  • Check carefully after replacement, find problems in time and fix them.


There are four kinds of home doors popular in the current market. They are wooden door, folding door, swing door, sliding door.

And mainstream window types are aluminium awning window, casement window, sliding window.

Choose your favourite doors and windows, and maintain them regularly according to the correct method.

When the doors and windows are aging or you want to replace them with new ones, follow the correct steps and methods, or let a professional person change them.

If you like this article or this article helps you feel free to share it with your friends.

white windows

Aluminium vs vinyl windows


Windows are indispensable in home decoration. In recent years, the window market has developed rapidly, with many new materials and styles. Most popular and widely used windows of them are aluminium windows and vinyl windows. For aluminium windows vs vinyl windows, what should we know?

Let’s get to know the aluminium windows and vinyl windows popular currently, and the advantages and disadvantages of these two types of windows.

aluminium vs vinyl windows

How to choose the right style for home decoration?

What should we pay attention to choosing the right style for our home?


Choose windows with excellent window functions.

Pay attention to sound insulation effect, heat insulation, airtightness, water tightness, flame retardant, lighting, ventilation, and environmental protection of the windows you like.

It is recommended to choose energy-saving windows for home windows.

It can block the outdoor heat energy out in summer, and keep the indoor heat energy inside. That can save power consumption of air conditioning and heating.

The manufacturing process of windows also has a great influence on the function.

Special attention should be paid to check for welding defects, such as open welding, missing welding, etc.

Check welding defects carefully. Problems of them are open welding, missing welding, etc

Check the corners of the windows are flat, the sealing strips are tight, the door leaves and the door frames are well closed, the gap is uniform, and the window is flexible to open.

Carefully check whether the paint surface of the product is bright and the texture is clear. The paint surface must not have obvious scratches, bubbles and other defects.

Good accessories ensure and increase the service life of windows.

try to choose accessories with good performance, flexible opening and closing.

Good windows use multi-point locks. The more lock points they have, the smaller the force of each lock there is, and the windows have a stronger resistance to wind pressure.

Unqualified accessories of windows have a bad influence on the service life of the windows.


The most important thing for window selection is the material of the window.

Nowadays, most houses have large windows, and there are many high-rise buildings.

The material thickness of the selected window should be more than 2.5 mm, and the inner cavity is of a three-cavity structure. Such a window has a closed drainage cavity and an isolation cavity. That will ensure that the window will not be deformed for decades, and the windows are not prone to discolouration and aging. The material thickness of the national standard is greater than or equal to 1.4m.

Float glass has better performance. Float glass is much better than flat glass in terms of heat insulation, heat preservation, light transmission and avoiding visual deformation.

As for the surface of the aluminium material, the surface of a good broken bridge aluminium window is relatively smooth and the section is shiny.

The material of heat insulation strip, nylon material is better for the material of heat insulation strips.

Glass fibre reinforced plastic window: lighter, high strength, and aging resistance. There is no expansion under direct sunlight, no shrinkage in cold weather. There is no need for mental reinforcement and has a long service life.

Aluminium window: bright and durable.

Aluminium wood and windows are frame bodies. They are mechanically compounded with thermally insulated aluminium alloys. Aluminium wood windows are mainly made of original wood, and the overall cost is relatively high. Aluminium alloy has a protective effect on the appearance of windows.

Plastic steel window: strong and stable, thermal insulation.

The market situation of plastic windows is chaotic. The windows with the same material have different accessories and craftsmanship, and the price varies greatly. The defects of some low-quality plastic windows are obvious.

The auxiliary materials such as the bead and seal of these windows are not matched with the main material, and the appearance is rough and the sealing is poor.

Type of window

There are floor-to-ceiling windows, exterior bay windows and special-shaped windows in the current market. Different windows fit the needs of different rooms.

Suitable window types for home decoration:

  • Double hinged windows: there are two hammocks. They can be fixed up and down on the same track.

  • Framed windows: It looks a bit like a door. The frame window rotates around the hinges installed on the sides. Even in the narrow passage, the window will not bump the head of a person.

  • Pergola windows: hinges are on the top of the window, and you can open it from the bottom.

  • Sliding window: can move from side to side on the slide rail. Suitable for small spaces. You can use the small sliding window for leading to the terrace.

You can design or choose different window types according to different needs and the style of your house.

For example, the high-end hanging in-opening windows can be used in the master bedroom. You can outside flat windows for the study room. You can use sliding windows to seal the balcony. For windows with large openings, you can use combined windows. If the residence is above seven floors, not to choose out-opening the window.

Choose the suitable windows according to different climatic conditions and the way of indoor and outdoor air convection.


Do not ignore the brand of windows when choosing windows. The windows of good brands are more assured in quality.

You can check the product’s ex-factory certificate, pay attention to the ex-factory date, specifications, technical conditions, and production license number to see if the window manufacturer is regular.


The price of windows of the same brand is not the same in each construction material market. Therefore, go to the regular construction materials market to choose windows and compare prices, so as not to waste money.

Aluminium vs vinyl windows #1

What are aluminium windows

Aluminium windows are profiles with surface treatment. It is assembled with connecting parts, sealing parts and opening and closing hardware. Aluminium windows have to undergo rigorous performance tests before leaving the factory, and can only be installed and used after they meet the specified performance indicators.

There are sliding windows, swing windows, revolving windows, screen windows, shutters, fixed windows and hanging windows according to the difference of their structure and opening and closing methods. According to the different appearance and colour, There are silver-white, golden yellow, bronze, bronze, black and yellow appearance for Aluminium windows.

The aluminium windows are widely used now. Installation and after-sales service of the aluminium windows are convenient.

EEHE aluminium windows

What are vinyl windows

the main raw material of vinyl windows is PVC resin. PVC resin is a cheap alternative to wood and originated in the 1970s. In recent years, the production and application of vinyl windows have developed rapidly, especially in cold regions. They have become one of the leading products in the window market, with a service life of 20-40 years.

vinyl windows

Aluminium vs vinyl windows #2

Aluminium vs vinyl windows: Performance

Vinyl windows have better heat insulation, sound insulation sealing performance,and lighting performance than aluminium windows. This is one of the reasons why PVC windows are widely used in cold areas.

Aluminium vs vinyl windows: Appearance

Vinyl windows are more colourful than aluminium windows. They can be coordinated with various buildings. The square area of the whole window is about 4-9% smaller than aluminium.

Aluminium window paint will eventually wear out and requires maintenance and repair.

Aluminium vs vinyl windows: Durability and maintenance

Vinyl windows are made from multiple chambers and have a reinforced frame, giving them the ultimate structural integrity and strength. So you don’t need to repaint them. Hardly need maintenance, just clean the windows correctly in time.

Aluminium is very prone to sag and discolouration, and the paint is likely to wear away during use. You need to maintain and repair aluminium windows during their service life.

Condensation water on the window can accumulate mould and affect the performance of the window. There are fewer effects of temperature changes on the vinyl windows and less condensation on the windows.

Aluminium Windows produce more condensation from heat transfer from the aluminium. You need to do more maintenance than vinyl windows.

In the long run, choosing vinyl windows, you can save more maintenance fee.

Aluminium vs vinyl windows: Noise reduction

Vinyl Windows have thicker frames and are filled with foam, so they do a better job of reducing noise than aluminium Windows.

Aluminium vs vinyl windows: Energy efficiency

One of the most important considerations for choosing windows is energy efficiency. Why are vinyl windows more energy-efficient than aluminium windows?

Aluminium Windows absorb heat and emit it to your home, and the house has to rely more on air conditioning to keep cool in the summer. That will increase your electricity fee.

Vinyl Windows have insulated frames to help prevent the escape of heated and cooled air. Paired with low-radiation glass, this is the most energy-efficient window combination in the market today.

Advantage and Disadvantage

Advantages and disadvantage of aluminium window

Advantages and disadvantages of aluminium window


Long service life

The aluminium window is non-toxic, no other harmful substances and meet the environmental requirements. It is e a new generation of environmental protection products.

Water tightness and airtightness of the aluminium window is good, and keep the room from getting damp. It can protect the furniture.

Has good thermal insulation performance. Using air conditioning and heating is more energy – saving.

Good sound insulation, so that the family can have a good sleep.

Has various forms to choose, such as flat windows, push-pull windows, overhanging window.


Window frames are easily oxidized and require regular maintenance.

Advantages and disadvantage of vinyl window

Vinyl windows have corrosion resistance, and there is no need for paint maintenance. They are anti-corrosion, acid resistance, alkali resistance, salt resistance. So the moisture climates, salt fog and acid rain have little influence on them.

Meanwhile, it has a long service life and can use for around 30 years. In a natural environment, vinyl will not burn. It is good for fire prevention. Generally, vinyl windows require no paint maintenance.

However, compared with other types of windows, there are fewer choices of colours and styles of vinyl windows.

How to maintain

  1. Generally, the dust on the doors and windows should be cleaned regularly to keep the windows, glass and hardware clean and bright.

  2. Use a special cleaner to scrub the windows if they are contaminated with oil and other hard-to-clean things. And it is better not to use strong acids or strong alkaline solutions for cleaning. It will not only damage the surface easily but also damage the protective film and the oxide layer of hardware of the windows.

  3. The intensity to use windows should be moderate.

  4. Try to avoid hitting windows with hard objects or scratching the surface.

  5. If you find it inflexible to open and close the window, contact the manufacturer or the supplier of the window to repair them in time.

For more news about aluminium window maintenance, please visit How to clean aluminium windows


When you choose windows for your home, you can focus on their functions, material, types, and brand, to ensure the quality of the windows.

It is better to compared price among different window markets, and pick a substantial one.

There are a lot of advantages of aluminium windows and vinyl windows. But for aluminium vs vinyl windows, a vinyl one is better in performance, noise reduction, durability and less in maintenance fee. Meanwhile, Aluminium windows have lots of types and style to fit your house style.

Choose the qualified one depends on your need and budget, do the cleaning and maintenance in time.

If this article helps you out with how to choose the right style for your home or the information of aluminium vs vinyl windows, please share it with your friends. Keep following our blogs, more practical news is coming.

aluminium vs vinyl windows

Types of eco-friendly windows and doors material

With global warming becoming more and more serious, people are more yearning to choose some low-carbon and eco-friendly windows and doors material. These materials release less indoor polluting gases and are more beautiful than traditional materials. How to judge the low-carbon environmental protection materials, and what criteria should be used to choose? There are so many environmentally friendly windows and doors on the market, which brand is good and meet the people’s demand as well?

Through this article, you will learn about the common materials and types of eco-friendly windows and doors on the market currently. We will introduce the types of eco-friendly windows and doors, and how this material protects the environment and plays a role in environmental protection, also how they are energy saving. Finally, we will give a few tips on how to choose sustainable windows and doors.

What is eco-friendly windows and doors?

Generally, eco-friendly windows refer to the full window unit that is eco-friendly. Frame wise this means a frame that is constructed with a lower transfer material such as wood, composite or vinyl, and that is resistant to water or structural damages with thaws or freezing temperatures outside. For the panes themselves, you should be looking for double pane windows.

Double pane windows are constructed to have two single pane glass panes with an air gap. This air gap ensures that hot air does not exist and makes the window resistant to fogging up or frosting. Finally, the finish or glazing of the window also affects the eco-friendly nature of a window. Most eco-friendly windows have what is called a low e glaze which works to limit the impact that UV rays have on the home, and the surrounding furniture.

Types of eco-friendly windows and doors materials

Here are 4 types eco-friendly windows and doors material we used most widely


Vinyl eco friendly windows are one of the most popular windows in that they are extremely durable, highly energy efficient, and cost-effective. One of the cons of vinyl windows is that they are available in fewer styles than their counterparts when it comes to color and texture. However, for those concerned with skyrocketing energy costs, vinyl windows are the most energy efficient option, which can make a huge difference in lowering heating and cooling costs.

window and doors - banner


The best choice for eco-friendly windows is fiberglass. However, it is the most expensive window material. The fact that these windows will last for a long time and are resistant to damage from denting, rotting, and warping will help deter the cost, as they will not need a great deal of upkeep and repair.


Those who prefer a more traditional looking window for their home usually opt for wooden windows. They cost less than fiberglass windows and are indeed elegant for older homes. However, wood windows are prone to such conditions as warping and rotting, as they are not able to withstand harsh weather conditions as well as other window materials.



Aluminum is the most popular choice for windows, as it can withstand even the harshest weather due to its high durability. Keep in mind that aluminum windows tend to warp as they age; thus, they do not have a longer lifespan as do fiberglass and vinyl windows.

Standards for eco-friendly windows and doors

Standard 1: Thermal insulation

Modern Chinese buildings are used to installing large transparent windows to facilitate indoor lighting. In the case of poor thermal insulation of windows and doors , it has led to increased electricity and coal consumption for heating in winter in the vast northern regions.

According to calculations by relevant departments, the current standard K value for windows and doors  in Europe is 1.3, and the average K value for windows and doors  in my country is about 3.5. The area of existing buildings and housing in cities and towns in China is about 63 billion square meters.

If windows and doors  account for 15% of the construction area, if the windows and doors  used in these buildings are replaced by high-end energy-saving windows and doors , it can save 180 million tons of standard coal every year, which is about the whole year of China. 10% of coal production, the energy saving value is huge.

Standard 2: Thermal insulation

It can be seen from the relevant report that in terms of temperature, the temperature difference between the use of energy-saving and environmental protection windows and doors  and the use of ordinary windows and doors  can be about 4°C.

If calculated according to a family of three living in a 100-square-meter house, keeping the indoor temperature at 20°C to 26°C, only a two-horsepower air conditioner consumes 10 to 12 kWh a day.

Invincible scenery sun room

If you use energy-saving windows and doors  with thermal insulation , Can save at least 30% of electricity, that is, the air conditioner is turned on for 2 hours, and the indoor temperature can be maintained for 5 to 6 hours at a comfortable temperature. Calculated to save 3 to 4 kWh a day, 3 months in summer can save about 270 kWh, save more than 150 yuan, and save energy by more than 25%.

Standard 3: sound insulation and air tightness

When it comes to environmental pollution, most people think of air pollution such as smog. However, according to relevant reports, in 2016, Chinese authorities received a total of 1.19 million environmental complaints, of which 522,000 were noise complaints, accounting for 43.9% of the total environmental complaints.

Moreover, the larger the city, the worse the noise pollution. Noise pollution is becoming a shortcoming of the urban environment. If you use energy-saving windows and doors , you can effectively reduce air pollution and noise pollution.

According to research, a room facing the street, the noise during the day may reach 70 decibels to 90 decibels, and the use of energy-saving windows and doors  can reduce the noise by at least 35%, allowing We have a quiet place to rest and study.

Standard 4: Utilization

The focus of energy conservation and environmental protection is to solve the problem of resource shortage in China.

China accounts for 9% of the world’s arable land, 6% of water resources, 4% of forests, 1.8% oil, 0.7% natural gas, less than 9% iron ore, less than 5% copper ore, and less than 2% Bauxite mines feed 22% of the world’s population; most mineral resources have less than half the world’s average per capita.

China’s coal, oil, and natural gas per capita resources are only 55%, 11%, and 4%. China’s advantage is its large population, and its disadvantage is its lack of resources. Therefore, to achieve energy-saving environmental protection windows and doors , in the choice of materials, we must choose materials that are easy to recycle and are conducive to environmental protection.

How's the eco-friendly material do help to the environment?

Windows and doors are the weak links in the insulation of building envelopes. From the analysis of building energy consumption, it is found that the energy lost through the external windows of the house is very serious, which is the main reason for affecting the thermal environment of the building and causing excessive energy consumption. .

In traditional buildings, the heat transfer through the window accounts for more than 20% of the total energy consumption of the building; in energy-efficient buildings, when the thermal resistance of the wall using insulation materials increases, the heat loss of the window accounts for a greater proportion of the total energy consumption of the building. The reason for the energy loss of windows and doors  is the heat exchange between the windows and doors  and the surrounding environment. The process includes: the heat of solar radiation entering the building through the glass; the heat transfer loss through the glass; the heat loss through the window pane and the window frame; the window opening heat The heat loss caused by the bridge; the heat loss caused by the cold wind penetration of the gap, etc.

It is understood that there are many factors that affect the heat loss of windows and doors , mainly in the following aspects: the heat transfer coefficient of windows and doors . The heat transfer coefficient of windows and doors  refers to the heat transfer through a unit area in a unit time. The greater the heat transfer coefficient, the greater the heat loss through the windows and doors  in winter. Therefore, by selecting materials for windows and doors , the indoor energy is effectively maintained to save energy.

How to choose for your home decoration

 1. Use eco-friendly materials

Due to the development of new materials, the technology of the main materials (frame materials, glass, seals, hardware accessories and shading facilities, etc.) that make up windows is progressing rapidly, and the use of energy-saving materials is an effective way to save energy for windows and doors

Frame material: The window profile accounts for about 15% to 30% of the opening area of the outer window, which is another weak link of energy loss in the outer window of the building. Therefore, the selection of the window profile is also crucial. At present, there are many types of energy-saving windows, such as heat-insulated aluminum, heat-insulated steel, plastic profiles, glass steel and composite materials (aluminum-plastic, aluminum-wood, etc.).

Among them, the energy-saving effect of the broken bridge aluminum material is better, and it is widely used. It not only retains the advantages of aluminum profiles, but also greatly reduces the heat transfer coefficient of aluminum profiles. Broken bridge aluminum material is to use hot bridge (cold bridge) technology in the aluminum alloy profile section to make the profile divided into inner and outer parts.

 2.  The type of glass

In windows, the glass area accounts for 65% to 75% of the window area. The thermal resistance of ordinary glass is very small, and it almost absorbs far-infrared heat radiation. Single-layer ordinary glass cannot achieve the effect of heat preservation and energy saving. There are many types of door and window glass. Different types of glass have very different light transmittance, shading coefficient and heat transfer coefficient. Thermal conductivity and shading are dual. For winter, we hope that the solar radiation gets heat and makes the indoor temperature rise. But in summer, I hope to reduce solar radiation and avoid entering the room.

Therefore, for different regions, the glass with corresponding heat transfer coefficient and shading coefficient should be selected. In order to reduce thermal conductivity and improve shading, at present, commonly used processing methods for door and window glass are:

Insulating glass

Insulating glass is two or more pieces of glass, with spacers to control the spacing between the inner and outer pieces of insulating glass. The periphery of the double glass is sealed with a sealant to make dry gas between the glass layers, which has the functions of sound insulation, heat insulation, anti-condensation and reducing energy consumption.

Glass coating

The physical or chemical coating process is used to change the heat reflection characteristics of the glass surface and directly reflect the solar radiation back, thereby improving the shading and heat insulation performance of the glass. Coated glass is divided into heat reflective glass (also known as sunlight control glass) and low-e glass (also known as Low-E glass).

The heat reflective glass can change the shading performance in a large range by configuring the structure and thickness of the film layer. Due to the coating of highly reflective and non-heat-absorbing infrared materials, Low-E glass can reflect the heat radiation of the solar band, thereby effectively controlling the sunshade performance of the glass, and also significantly reducing the heat transfer coefficient of the glass.

Glass staining

Adding colorants in the manufacturing process, the shading and thermal insulation properties of colored glass are better than transparent glass. By absorbing part of the direct transmission of sunlight, the solar radiation heat is reduced into the room; however, due to the absorption of heat, the temperature of the self is increased, the temperature difference heat transfer is increased, and the insulation effect is reduced.

3.Ensure the airtightness of windows and doors

The airtightness of doors and windows refers to the ability to prevent air penetration when the doors and windows are closed. The level of air tightness of doors and windows has a great impact on heat loss. Outdoor wind changes will adversely affect room temperature. The higher the air tightness level, the less heat loss and the smaller the impact on room temperature.

The quality of the opening sealing material not only affects the insulation and energy saving effect of the house, but also relates to the waterproof performance of the wall, and the opening sealing material should be selected correctly.

At present, the gap between the four sides of the steel-plastic door and window frame and the wall is usually filled with polyurethane foam. Such materials not only have a filling effect, but also have good sealing and thermal insulation properties. In addition, the more widely used sealing materials include silicone rubber and EPDM rubber strips.

Sealing strips for other parts are divided into wool strips and rubber strips. Sealing strips are used for sealing between glass and fans and frames, and play an important role in watertightness, airtightness and energy saving in plastic steel doors and windows. The sealing strip must have sufficient tensile strength, good elasticity, good temperature resistance and aging resistance, and the cross-sectional structure size should match the plastic steel door and window profiles.

Bad quality rubber strips have poor aging resistance. After prolonged exposure to the sun, the rubber strips will harden after aging, lose their elasticity, and easily fall off. Not only will the seals be poor, but they will also cause safety hazards due to loose glass.


With the development of the environment, more and more people are pursuing a green and environmentally friendly lifestyle. Eco-friendly materials for windows and doors are also one of people’s first choices. As Eco-friendly windows and doors, energy saving and noise prevention must be achieved. Before you buying, you should also choose eco-friendly profiles as well.

About Eehe

As a reliable windows and doors manufacture, Eehe was founded in 2008, is an enterprise focusing on manufacturing of aluminum windows and doors wooden doors, sunrooms and shower rooms.

We are having 4 modern manufacturing plants in China with more than 300,000sqm workshop and showroom, our monthly production capacity: 100,000 pieces wooden doors & 150,000 pieces Aluminum products. With 1,000 excellent staffs working in Eehe, we has the sales network spreading to nearly 1,000 cities all around China, and nearly 100 countries all over the world. Since its inception, EEHE members make all the efforts for the EEHE spirit of  “Excellent quality makes perfect life”, and persist in the road of innovation to bring a healthy, environmental-friendly door and window as the Primary responsibility.

We Promise:

From first-contact through to delivery & Installation, EEHE care about our customers’ ideas, dreams and journey, and our engineers and inspectors ensure that every product maintains high-standards throughout customization.

After-Sales will be with you every step of the way.


We take great pride in our designs and all our products are built with love.

Customers First

Our team will work with you to bring your ideas and dreams to reality and keep you updated every step of the way.


For peace of mind we have warranty and after-sales care teams to help with any problems you may encounter.

About Eehe

Choose a right shower room glass door is important

Shower room glass door is important

A bathroom is a place where water vapour is heavy in the home, that’s why most people are choosing glass doors as their first choice. In this way, it is not necessary to worry about the wooden door will be eroded by water for a long time, and it is also transparent which is the preferred choice of the most household. However, as a special material, glass also has many precautions when acting on the shower room. In this article you can learn about the types and materials of shower room glass doors, as well as the precautions you need to know when choosing a shower room glass doors. Finally, we will also provide guidance on how to choose the right shower room glass door and how to install the glass door.

Amazing master bathroom with large glass walk-in shower
Modern bathroom with glass shower and marble tile.
eehe-shower-room 2eehe-shower-room 2

Types of Shower Doors

The glass partition in the shower room is a very common phenomenon. Generally, sliding doors are the most widely used. This types of doors can be closed or opened freely. Secondly, the space of the bathroom is limited. In many shower room design, it is generally to achieve the effect of saving space. However, let’s take a look at the types and designs of shower room glass doors.

A frameless shower door is made of a single pane and pivots out into the room for a clean, modern look. Not only is this pivot door elegant and stylish, but it’s also one of the more durable and structurally sound options.

For larger bathrooms, consider a frameless shower enclosure to add dimension to your room. Like frameless doors, this design gives your bathroom a clean and modern feel.

Enclosures can be rectangular or hexagonal, depending on the configuration of your bathroom and budget.

Bi-fold shower doors are great for bathrooms with limited space, like corner bathrooms. These doors feature panels that fold inside the shower, allowing you to utilize your space as much as possible.

Not only are these doors a practical solution for smaller bathrooms, but they are also extremely affordable.

If you want to create a walk-in shower, curved glass doors can open up your shower and give the feeling of a larger space. Curved glass doors feature a frame at the top and bottom of the door.

What You Need to Know Before Choosing a Glass Shower Door

After you decide to rebuild your shower room and using glass as a door, what you need to know before choosing a shower room glass door?

A: What kind of situation is suitable for a shower room

  1. The bathroom has a space of over 900*900mm, which will not affect the use of other equipment.

Less than this size, it is not recommended to build a shower room, considering the actual use of space, it is more recommended to consider in this area range.


  1. Dry and wet separation is required

The conventional height that the flower asperses is 2.1 meters, shower room basic height is in 1.8 meters above, make sure flower sprinkles waterfalls in person top of head, not outside splash. You can choose the right height according to your height.


  1. If you have a cold shower, a shower room will keep you warm

Modern bathroom with glass shower and marble tile.

B: Tips for glass doors:

  1. Material selection

The main materials of the shower room are glass and profiles, as well as some small parts, such as rails, hardware and water barriers, etc.


Common thicknesses of glass are 6mm, 8mm, 10mm, and 12mm. Households generally use 6mm and 8mm. The prices of 10mm and 12mm will be relatively high, because the glass will be thicker and heavier. Secondly, the glass door of the shower room must be tempered glass, and the 3C certification mark can be seen.

The high-quality tempered glass looks more transparent, without impurities, bubbles, corrugations, smooth surface and crisp sound.

shower seal room


The profile frame of the glass door must have sufficient strength, and the main materials are stainless steel and aluminum alloy. Compared with aluminum alloy, the strength and durability of stainless steel will be better, and the price will be relatively higher.

The thickness of the glass door used for home is at least 1.2mm, the thicker the stronger, the higher the price.

In general, the aluminum alloy profiles are all polished. Normally, the surface should be smooth without trachoma, and the feel should be smooth.

The stainless steel plated surface is very bright, but it is easy to leave fingerprints and needs to be taken care of frequently

#Glass door track

Generally have sliding glass doors or swing glass doors

Considering that the sliding door is more space-saving, suitable for small toilets, and the flat door should ensure that there is enough space to open the door.

The track of the glass door is also divided into aluminium alloy and stainless steel

The track of aluminium alloy is mostly curved, with a certain arc. Because the arch is more resistant to compression.

To judge the quality of the track, you can push it multiple times to try. If the glass door has no noise during use, smooth and quiet, it is a better track material and is also the safest choice.

Glass door track

C: What should be paid attention to when installing the shower room

#Water retaining strip

The water-retaining bar of the shower room must be level and cannot be placed on the floor tile, so the suitable installation of ceramic tiles should be the first choice of the shower room and finally assembled with the water-retaining bar.

#Installation materials

Check whether the installation material is the same as your choice. After installation, check the glass for damage, especially the four corners of the glass door, and check whether the glass is flat and smooth.


#Glass door track

Open the door several times to ensure that the glass door can be opened and closed smoothly.

Tips for Choosing the Perfect Glass Shower Enclosure

  1. Consider Your Renovation Budget

When it comes to any sort of remodel or renovation, the number one consideration is your budget. That’s certainly true for choosing the perfect glass shower enclosure, which can come in a wide selection of styles, shapes and sizes. Decide from the start how much you’re willing to spend. You will need to consider not just the cost of the enclosure, but also the cost of the installation. Labour costs will vary depending on a number of factors, including the complexity of the installation, as well as your geographic location.

  1. Consider Your Bathroom Space

When thinking about your shower enclosure, remember that it maintains a static footprint in your bathroom. Taking this into consideration is essential in determining the type of shower enclosure that is right for your bathroom upgrade.


  1. Consider Your Decorating Style

With hundreds of styles available, you’ll find there are plenty of options when it comes to choosing the perfect glass shower enclosure. For example, you might opt for a uniquely shaped enclosure. Different shapes, such as curved semicircles and boxy rectangles, can highlight your bathroom’s design scheme and your personal style preferences.

Tips for installation of bathroom glass door

 1. Shower glass installation – ready

(1) Check the material of the glass door, see if it meets their own requirements, and then check whether the surface is damaged, ready to install the kit.


 2. Installation of shower glass – measuring and punching

(1) Before installing the shower room, measure the actual size of the toilet with a soft ruler first, and make a mark on the position that needs to use, facilitate later installation.

(2) According to the installation tips and the corresponding data, use the electric drill to drill holes on the corresponding wall. Pay attention to the hole depth and spacing.

 3. Shower room glass installation – fixed frame

(1) According to the instructions, build the basic frame structure, fix it with screws, and then continue to assemble. Try not to use the wrong parts.

(2) Screw the screws in the corresponding position and start to install the toughened glass wall with a thickness of about 6cm. Clamp the glass with two U-shaped grooves on the top and bottom respectively, and get stuck on the aluminium alloy frame.

 4. Glass installation in shower room – glass door

(1) If the installation of a double-open arc shower door, can be used up and down two two-wheel rail installed in the aluminum alloy frame groove, left and right sides are installed on a stop anti-collision bead.

(2) Next, prepare to install the handle. The handle has corresponding fixing screw holes. Just use the screwdriver to screw on all of them.


 5. Shower room glass installation – Test

(1) First check whether the installation of the bathroom is correct, and then see whether the installation of large parts is correct. If there is no problem, you can try to imitate the use, regardless of whether the door is flexible, drainage problems

(2) If there is no problem, it can be cleaned as a whole once, and then the corresponding method can be used to repair it.


Shower room as an important part in the house, the quality issue also can not be ignored. As we know, shower room glass doors usually be the first choice for most owner when they decided to rebuild thire bathroom. In this article, you will learn the different typs of shower room and we’re gonna teach you how to choos the fits one for your home.What’s more , the tips befor you buy a showr room glass door may also help you to save a lot !

About Eehe

As a reliable windows and doors manufacture, Eehe was founded in 2008, is an enterprise focusing on manufacturing of aluminum windows and doors wooden doors, sunrooms and shower rooms.

We are having 4 modern manufacturing plants in China with more than 300,000sqm workshop and showroom, our monthly production capacity: 100,000 pieces wooden doors & 150,000 pieces Aluminum products. With 1,000 excellent staffs working in Eehe, we has the sales network spreading to nearly 1,000 cities all around China, and nearly 100 countries all over the world. Since its inception, EEHE members make all the efforts for the EEHE spirit of  “Excellent quality makes perfect life”, and persist in the road of innovation to bring a healthy, environmental-friendly door and window as the Primary responsibility.

We Promise:

From first-contact through to delivery & Installation, EEHE care about our customers’ ideas, dreams and journey, and our engineers and inspectors ensure that every product maintains high-standards throughout customization.

After-Sales will be with you every step of the way.


We take great pride in our designs and all our products are built with love.

Customers First

Our team will work with you to bring your ideas and dreams to reality and keep you updated every step of the way.


For peace of mind we have warranty and after-sales care teams to help with any problems you may encounter.

About Eehe

an old women with window cleaning tools

How to clean aluminium windows


Nowadays, Aluminum windows are increasingly popular because of their longevity and low maintenance cost, more and more people choose to use aluminium windows is becoming a trend. Even so, it also raises a new issue: How to clean aluminium windows?

There are many difficulties when we try to do the cleaning and maintenance. Such as maddening streaks, oxidation, grease, absorbents, and stains on the frames.

If you are confused by how to clean aluminium windows and the upkeep tips, this article will help you out.

importance of how to clean aluminium window

Key points to know before cleaning 

If you are already professional about these two topics below, please skip this part and go straight to how to clean aluminium windows.

Causes of stain formation on aluminium windows

  1. more dust will accumulate on the windows than usual In windy weather
  2. small debris and dust in the rainwater will also remain on the window after the raining, and the raindrops dried up unevenly on the glass will also form visible steaks on the window glass. It has a bad effect on the cleanliness and clarity of the window.
  3. Some dirty things could stick to the window when open and close the window by hands
  4. a small bird flying over occasionally, may leave bird droppings on the windows.
  5. when the cooking fumes go through the window, they will form stains on the window that are difficult to remove, especially for the kitchen window.
  6. The aluminium windows near the seaside, due to the salt component of the sea breeze, will form white spots on the windows and could have corroded the aluminium window frames.
  7. Rust will cover some aluminium window frames that have been used for a long time, due to the water and oxygen that the windows is often exposed to. if someone uses the wrong detergent and tools to scrub it off, may cause damage of window frames.

Difficulties of cleaning aluminium windows

  1. Unsuitable cleaning steps would leave traces and streaks on the window glass.
  2. Tools and detergent for aluminium window cleaning are required, otherwise, it will slightly or seriously damage the aluminium window frames.
  3. The grooves and little gaps of the window frames are too small to be cleaned. if you use unsuitable tools or force too hard to do the cleaning, will damage the sliding grooves of the window and it will cause bad effect on use.
  4. A lot of users have no idea about why there are oxidation spots and rust and treat the aluminium windows as windows made from other materials. It will slightly damage the window frames.

So, it is better to look at specific practices for how to clean the aluminium windows, to make your windows clean and tidy, and to maintain its good function, rather than do the cleaning in a wrong way. Correct maintenance can also improve the longevity of the windows.

Now, let us see how to clean aluminium windows!

How to clean aluminium window

So how can we clean these dust, stains, and oxidized spots and rust?

Just follow the steps below.

Step to clean aluminium windows

Prepare a complete set of tools

  1. An old towel
  2. A buckskin cloth or a dry rag
  3. A sponge: used for dipping detergent
  4. A bucket or a basin
  5. A small brush: a relatively common tool for cleaning glass windows, used to clean up the dust or spider webs around the window glass.
  6. A window cleaner: measure your narrowest window and chose the suitable width that can fit in. It will save a lot of time and avoid frustration during the cleaning process.
  7. Detergent specifically for aluminium windows:avoid corrodes materials.
  8. Waste newspaper: there is rag debris left on the glass after drying the windows with a rag. With pleated newspapers, you can remove them easily.


Cleaning process

  1. lay an old towel under the window before cleaning the windows in the house to absorb the dripping water.
  2. clean the dust or spiderwebs around the window glass with a small brush
  3. Fill the bucket or sink with warm water, then add a small amount of detergent
  4. Soak the sponge in water with detergent added
  5. cleaning from the upper left corner of the window and drag the sponge directly down.
  6. Scrub the glass from top to bottom to wipe the water off with a window cleaner.
  7. Dry the window cleaner up with a buckskin cloth or a rag.
  8. Cleaning the next line from the left to the right of the window.
  9. Scrub the whole glass with a deerskin cloth or a dry rag
  10. Clean the rag debris left on the glass with waste newspaper


  1. Choose a suitable weather

Do not do window cleaning in hot sunlight, the water in the detergent will dry quickly and unevenly, leaving streaks on the glass. So weather without direct sunlight would be a better choice.

  1. Don’t forget a dry rag

After cleaning each line, don’t forget to wipe the wiper with a buckskin cloth or a dry rag. Otherwise, there will be obvious wipe marks on the window glass.

a picture of how to clean aluminum windows with sponge

How to clean aluminium window frames

The groove of the window frame is prone to accumulation of dirt and grime, small stains. That makes the cleaning difficult. Therefore, many people find it impossible to clean the window frames.

Aluminium is a relatively soft material, improper use of tools or trying too hard, may damage the window frames.

Aluminium windows are often exposed to oxygen and water during use, resulting in the oxidation of the window frame. Over time, they may even rust, which makes cleaning the window frame a problem.

Tools needed for cleaning aluminium window frames
  1. a small brush: for dust and spiderwebs around the window frame.
  2. a vacuum: for windows frames with a lot of dirt in the grooves and small gaps.
  3. a thin bamboo stick wrapped by a cloth: for small gaps of the frames.
  4. A bucket: the container for mixing water and detergent.
  5. Warm water: have a better effect in dissolving detergent than normal temperature water.
  6. Neutral detergent: aluminium-friendly.
  7. a non-abrasive cloth: avoid scratching the aluminium surface.
  8. a soft absorbent cloth: prone to drying the frames up after cleaning.
Cleaning steps of aluminium window frames
  1. Wipe the dust away in the window grooves with a small brush. If there is a lot of dust, a vacuum would be a better choice.
  2. Clean the narrower gaps with a thin bamboo stick wrapped by a cloth
  3. Fill the bucket with warm water, then add a small amount of neutral detergent, which is suitable for aluminium surfaces.
  4. Soak the rag in water with detergent added
  5. scrub the aluminium surface gently with a non-abrasive cloth
  6. Clean the oxidation
  7. Dry the frame with a soft absorbent cloth.
  1. Do not use strong acid and alkali detergent.
  2. Clean the aluminium frames with a non-abrasive cloth.


How to Clean Oxidation From Aluminum Windows

Oxidation spots

we can see some white spots on aluminium window frames sometimes.

Those are oxidation spots.

There are salt components in the sea breeze. When sea breeze goes through aluminium windows day after day, these components form white spots on the aluminium windows, and they could even corrode the aluminium window frames. That must be confusing you by how to clean oxidation from aluminium windows. It is not difficult to clean.

Rub it with the finest sandpaper until the white spots disappear

Oxidation rust

Aluminium windows are always exposed to oxygen and water, they will oxidize the aluminium frames and form rust.

If the oxidation is not serious, you can use a fibre brush with clean water to remove the rust.

If the oxidation is more serious, please follow the steps below, you can remove it easily.

Tools for how to clean aluminium windows are important. All you need for oxidation cleaning are a knife, a dry rag, and soapy water.

  1. scraped off the rust with a knife gently,
  2. wash the frame with soapy water,
  3. wipe with a dry cloth.
  4. polished with wax and polished with a dry cloth.

How to maintain aluminium windows – upkeep tips

Although the performance advantages of aluminium windows are outstanding, regular maintenance is beneficial to its longevity and neat appearance.

Here are some tips for you

  1. Dry the windows in time after rain.
  2. don’t pull and push hard when it is stuck, check your window and remove obstacles first
  3. Keep the windows clean, clean the window glass once a month and the window frames every two months.
  4. Do not step on the aluminium frame during cleaning, and do not pull the frame as a support, it is easy to wear window frames.
  5. Clean the grooves and sliding rails at the joint of the window leaf every three months to ensure the normal use of the hardware.
  6. Lubricating oil lubricates hardware rotation and sliding and locking points of the window. Use lubricating oil every three months.
  7. dripping lubricating oil in hardware rotation, sliding and locking points of the window, opened and closed the window 3-5 times to ensure thorough lubrication. It can increase the flexibility and service life of the hardware rotating mechanism.


The aluminium window is a product of good quality and longevity, but you still need to do regular cleaning and good maintenance to have a better experience with it.

Prepare a complete set of tools and use these simple and effective operations provided in this article to wash windows regularly

clean the aluminium frames with a neutral detergent,

be careful not to scrub aluminium windows with abrasive cloth.

Remember to apply a layer of wax to the window frame after cleaning oxidation.

And do the maintenance and upkeep in time, not only increase the period of use of aluminium windows but also improve your life.